Mini Kabibi Habibi

 Copyright 1992-2009, ZheJiang Dahua Information Technology Stock CO.LTD.
All Rights Reserved


Please translate strings as the following steps:

1, Keep a copy of this orgional file.

2, The string parse format is: 
key=value
WITHOUT any more unexpected whitespace, semicolon, quotation mark, etc.
ONLY the context of 'value' can be Modified.
Replace the old 'value' DIRECTLY with the new 'value'.
DON'T change any other symbols.

3, '|' is treated as sub-string separator, for example: 
weeks=Sun|Mon|Tue|Wed|Thu|Fri|Sat

4, Save the translated text file as UTF-8 format.
5, updatetime 20090720--by cai_xiaoxi

COM_EXALARM=annunciator
ConfigNet_Mail.EmptyAddr=The e-mail address can't be empty!
ConfigNet_Mail.MaxReciver=The amount of receivers exceeded the limit!
ConfigNet_Mail.ReciverAddr=The length of e-mail address exceeded the max!
ConfigNet_Mail.drop=The e-mail address should include ‘@’
IP_and_GatWay_not_in_same_gridding=IP address does not match Gateway
PPOE.unallowed_save_cfg=The username and password can't be empty!
PortConflict=Port Conflict
advc_dflt.Qsuregetdflt=Please select setting entries that you want to default.
advc_dflt.alldflt=Select all
advc_dflt.titledflt=CHANNEL NAME
advc_hdd.ROnoFormat=Read only disk could not format!
advc_hdd.alarmout=Alarm Output
advc_hdd.alarmreset=Alarm Release
advc_hdd.alarmset=Alarm Set
advc_hdd.capaoverflow=Capacity Overflow
advc_hdd.confpoint=storage point config
advc_hdd.delay=Delay
advc_hdd.diskerroralarm=Alarm When No Disk or Errors Occur
advc_hdd.diskno=HDD No.
advc_hdd.execute=Execute
advc_hdd.hddnumber=HDD number
advc_hdd.hddopt=Set to
advc_hdd.hddspace=Capacity
advc_hdd.localpoint=Local Storage Point
advc_hdd.lowerlimit=Less Than
advc_hdd.lowerspacealarm=Alarm When Free Space is Low
advc_hdd.noteremote=Remote record channel exceed max support channels
advc_hdd.numberError=Hdd Amount Error              
advc_hdd.partcapa=Disk Partition
advc_hdd.remotepoint=Remote Storage Point 
advc_hdd.status=Status
advc_hdd.status_err=Error
advc_hdd.status_ok=Normal
advc_hdd.suretoclear=Are you sure to clear all the data on the HDD?
advc_hdd.time=Record Time
advc_hdd.time1=Record Time1
advc_hdd.time2=Record Time2
advc_hdd.type=Type
advc_hdd.type_b=For backup
advc_hdd.type_r=Read only
advc_hdd.type_rd=Redundant
advc_hdd.type_snapshot=Snapshot
advc_hdd.type_text=Text
advc_hdd.type_w=Read/Write
advc_hdd.vopsel=Read/Write|Read only|Redundant|Format|Recover|Snapshot
advc_hdd.vopsel1=Read/Write
advc_hdd.vopsel2=Read only
advc_hdd.vopsel3=Redundant
advc_hdd.vopsel4=Snapshot
advc_hdd.vopsel5=Format
advc_hdd.vopsel6=Recover
advc_hdd.vopselText=Text
advc_main.atmpostip=ATM/POS Setting
advc_main.automttip=Alarm Decoder Setup
advc_main.configImExport=Import Or Export the config files!
advc_main.getdflttip=Restore system parameters to the factory default.
advc_main.hddmngtip=HDD data management.
advc_main.netcameratip=IP Camera Config
advc_main.scrtip=Set screen saver interval and etc.
advc_main.sysupgrade_tip=Upgrade software for this device.
advc_main.tvadjusttip=Adjust the position and color of the TV Output.
advc_main.videomatrixtip=Distribute video matrix inputs to outputs 
advc_psw.adminpsw=Admin
advc_psw.error=Password Error.
advc_psw.newpsw=New
advc_psw.oldpsw=Old
advc_psw.rever=
advc_psw.samepsw=Password is the same as the original.
advc_psw.saved=Password Saved.
advc_psw.userpsw=User
advc_psw.verifypsw=Confirm
advc_rec.almmod=Alarm Type
advc_rec.automatic=Schedule
advc_rec.closed=Stop
advc_rec.manual=Manual
advc_rec.recmod=Record Mode
advc_rec.reserve=
advc_sysupgrade.module_from_01=USB Bar
advc_sysupgrade.module_from_02=FTP
advc_sysupgrade.module_from_03=w
advc_sysupgrade.module_from_04=w
advc_sysupgrade.module_name_01=Boot Loader
advc_sysupgrade.module_name_02=Kernel
advc_sysupgrade.module_name_03=Driver
advc_sysupgrade.module_name_04=Application
advc_sysupgrade.module_name_05=Data
advc_sysupgrade.module_name_06=File System
advc_sysupgrade.module_name_07=Module7
advc_sysupgrade.msg_failed=Upgrade Failed
advc_sysupgrade.msg_file_error=File Error.
advc_sysupgrade.msg_file_not_found=No File Exists.
advc_sysupgrade.msg_succeeded=Upgrade Succeeded.
advc_sysupgrade.select_from=Load File From
advc_sysupgrade.select_module=Select the Module
advc_tv.antidither=Anti-Dither
alarm.videoloss=No Video
alarm_smtp.devicename=Alarm device name
alarm_smtp.inchannel=Alarm input channel No.
alarm_smtp.matter=Alarm event
alarm_smtp.senderIP=Sender IP address
alarm_smtp.starttime=Alarm start time(D/M/Y H:M:S)
alarm_smtp.stoptime=Alarm stop time(D/M/Y H:M:S)
appEventAlarmAudio=Audio Detect
appEventAlarmInfrared=Wireless Alarm
appEventAlarmLocal=Local Alarm
appEventAlarmNet=Net Alarm
appEventBatteryLowSpace=Battery Low Space
appEventHddNumber=HDD number
appEventNetAbort=Net Disconnection
appEventNetArp=IP Conflicted
appEventStorageFailure=Disk Error
appEventStorageLowSpace=Disk No Space
appEventStorageNotExist=No Disk
appEventTemperatureHigh=Temperature Too High.
appEventVideoBlind=Camera Masking 
appEventVideoLoss=Video Loss
appEventVideoMotion=Motion Detect
appEventIntellDetect=Intelligentized Detect
assist_func.imgconf=Color Setting
assist_func.ptzctrl=Pan/Tilt/Zoom
assist_func.reserv=
atm_card_str.field0=Field1
atm_card_str.field1=Field2
atm_card_str.field2=Field3
atm_card_str.field3=Field4
atm_card_str.field4=Field5
atm_card_str.field5=Field6
atm_card_str.field6=Field7
atm_card_str.field7=Field8
atm_card_str.pKey=Key
atm_card_str.pLength=Length
atm_card_str.pOffset=StartPosition
atm_card_str.pTitle=Title
atm_card_str.paccount=ACCOUNT
atm_card_str.paccount_type=A TYPE
atm_card_str.pappendplace=Display Position
atm_card_str.pappendplacet=top|bottom
atm_card_str.pbranch_no=BRANCH
atm_card_str.pmatchine_no=ATM NO
atm_card_str.ptransaction_code=CODE
atm_card_str.ptransaction_date=DATE
atm_card_str.ptransaction_destination=DEST
atm_card_str.ptransaction_error=ERROR
atm_card_str.ptransaction_errors=--
atm_card_str.ptransaction_money=MONEY
atm_card_str.ptransaction_no=NUMBER
atm_card_str.ptransaction_time=TIME
atm_card_str.ptransaction_type=T TYPE
atm_card_str.ptransaction_types=--|Search|Get Money|Modify Password|Transfer|Save Money
bkup_data.Qsureclrbkfile=Confirm format on the selected device?
bkup_data.backuping=Being backup, Please Waiting.....
bkup_data.baseconfig=Base Config
bkup_data.startnetbkup=NetBackup
bkup_data.bkupclear=Erase
bkup_data.bkuperror=An error has occured.
bkup_data.bkupover=Backup finished.
bkup_data.bkupremoveall=Remove
bkup_data.bkupstop=Backup Stopped.
bkup_data.channelmatcherror=The PIP channels must be different!
bkup_data.clearerase=Disc is not rewritable
bkup_data.clearerror=Erase Failed.
bkup_data.clearnodisk=Disc not present.
bkup_data.clearover=Erase Finished.
bkup_data.clone=Img Burning
bkup_data.device=Selected Device
bkup_data.devlist=Device List
bkup_data.dirpath=Path
bkup_data.endtime=End Time
bkup_data.export=EXPORT
bkup_data.filenumerror=The num of selected file must be even!
bkup_data.flashtousb=Save config file to USB device!
bkup_data.fntip=Select/Cancel backup device or file.
bkup_data.formatting=Formatting device, please wait!
bkup_data.import=IMPORT
bkup_data.mounterror=Mount error!
bkup_data.netconfig=Net Config
bkup_data.nochoice=Please choose the config files which to export!
bkup_data.nodev=You have not selected a device.
bkup_data.nofile=No file to backup.
bkup_data.nospace=Not enough space.
bkup_data.notsupport=Only support CD-ROM device for burning.
bkup_data.nulldev=No USB Device
bkup_data.onekey=Onekey Backup
bkup_data.onlyone=Only Support for Disc Device. 
bkup_data.openerror=Open error!
bkup_data.otherdevrun=You have selected another working device.
bkup_data.otherdevstop=You have selected another non-working device.
bkup_data.pipchannumerror=The num of selected channel must be even when you want to do PIP!
bkup_data.recordcancel=Backup is processing, confirm cancel?
bkup_data.recorderror=Backup error!
bkup_data.recordover=Backup completed!
bkup_data.recordpause=Pause 
bkup_data.recordrestart=Restart
bkup_data.recordstop=Backup stopped!
bkup_data.remaintime=Remaining time %d:%d:%d
bkup_data.rerecord=Attachment Burning
bkup_data.rerecorderror=Attachment burning is error
bkup_data.rerecordtimeout=Transmit attachment is overtime
bkup_data.rever=
bkup_data.seekerror=Seek error!
bkup_data.space=Space Required / Space Remaining:
bkup_data.start=Start
bkup_data.startadvancebkup=Case Backup
bkup_data.startbkup=Backup
bkup_data.startrecord=Burning
bkup_data.startsearch=Search
bkup_data.stop=Stop
bkup_data.stopcircleinturn=Stop Cycling Burning
bkup_data.stopinturns=Stop Alternate
bkup_data.stopping=Stopping device, please wait
bkup_data.stopsync=Stop Synchronize 
bkup_data.sttime=Start Time
bkup_data.suretocancel=Backup is processing, abort now?
bkup_data.suretoformat=Are you sure to format the selected device with left capacity 0
bkup_data.timematcherror=The start time and end time of the selected must be consistent!
bkup_data.totaltime=Start Time %02d:%02d:%02d Total time %02d:%02d:%02d
bkup_data.usbtoflash=Read the config file from USB device to FLASH!
bkup_data.userconfig=User Config
bkup_data.writeerror=Write error!
bkup_dev.allstate=Ready|Backup|Burning|Playback
bkup_dev.capa=Left Space/Total Space
bkup_dev.detect=Detect
bkup_dev.name=Name(Type)
bkup_dev.rever=
bkup_dev.searchfile=CH  Type       Start Time              End Time             Size(KB)
bkup_dev.state=Device Status
bkup_main.bkdatatip=Backup files to backup device or delete data on the device.
bkup_main.bkdevtip=Check backup device.
bkup_main.bkrecordtip=Backup to the cdrw in realtime.
bkup_main.rever=
bkup_realtime.alarmcon=Free space on the current disk
bkup_realtime.beep=Buzzer
bkup_realtime.begin=Start Time
bkup_realtime.capa=Total Capacity
bkup_realtime.capacity_alarm=  MB
bkup_realtime.changedisk=The space is insufficient, please insert a new CD/DVD.
bkup_realtime.circleinturn=Start Cycling Burning
bkup_realtime.discchange=Change Disk
bkup_realtime.elapse=Total Duration
bkup_realtime.end=End Time
bkup_realtime.inturns=Start Alternate 
bkup_realtime.nero=Burn't Capacity
bkup_realtime.remain=Left Capacity
bkup_realtime.remaintime=Limited Times
bkup_realtime.starttip=System is burning now, please wait
bkup_realtime.sync=Start Synchronize 
comstring.accessdenied=Access denied!
comstring.backupcancelaffirm=Backup Cancel Confirming...
comstring.channelstr=channel
comstring.comadd=Add
comstring.comall=All
comstring.combotton=Open |Close
comstring.comcanncel=Cancel
comstring.comchannel=Channel
comstring.comclose=Close
comstring.comcopy=Copy
comstring.comdate=Date
comstring.comdelete=Delete
comstring.comdflt=Default
comstring.comindex=Index
comstring.comloaddec=Loading decoder driver...
comstring.comloadenc=Loading encoder driver...
comstring.comloadsto=Loading storage driver...
comstring.commessage=Message
comstring.commodify=Modify
comstring.commonth=Jan|Feb|Mar|Apr|May|Jun|Jul|Aug|Sep|Oct|Nov|Dec
comstring.comok=OK
comstring.compagedown=Page Down
comstring.compageup=Page Up
comstring.compaste=Paste
comstring.compau=Please input the Register Code
comstring.compsw=Password
comstring.comreboot=Settings will be applied after system restarts, restart now?
comstring.comrestart=Settings will be applied after program restarts, restart now?
comstring.comrev=Remain
comstring.comsave=Save
comstring.comsavedata=Saving data...
comstring.comtime=Time
comstring.comupgrade=System upgrading, please wait...
comstring.comupgradeerror=Upgrade failed, please try again.
comstring.comweek=Su|Mo|Tu|We|Th|Fr|Sa
comstring.diskreaderr=The current operating HDD Read Error
comstring.diskwriteerr=The current operating HDD Write Error
comstring.nodisk=No available HDD for Recording!
comstring.replaystr=Playback
comstring.shutdownaffirm=Shutdown Confirming...
comstring.you_have_not=You have no authority with %s.
comstring.monitorconflict=Network monitor is in process,all-ch playback function is invalid now.
comstring.playdownloadconflict=Net playback or download is in process,all-ch playback function is invalid now.
conf_alm.DecConnect=Decoder Connection
conf_alm.MessagetoNet=Alarm Upload
conf_alm.audiomaxvalue=MaxVolume
conf_alm.audiominvalue=MinVolume
conf_alm.buzzer=Buzzer
conf_alm.decoder=Decoder
conf_alm.decodertype=Type
conf_alm.decodertypesel=None|4 output|8 output
conf_alm.delay=Latch
conf_alm.delaytype=Type
conf_alm.delaytypesel=Normal Close|Normal Open
conf_alm.ftp=FTP upload
conf_alm.index=No.
conf_alm.input=Alarm In
conf_alm.log=Log Enable
conf_alm.mail=Send Email
conf_alm.nochannel=No Channel to Select.
conf_alm.output=Alarm Out
conf_alm.prerec=PreRecord
conf_alm.presettitle=Set Preset
conf_alm.ptzlinkage=PTZ Activation
conf_alm.ptzpreset=Ptz Preset
conf_alm.recdelay=Delay
conf_alm.record=Record Channel
conf_alm.rever=
conf_alm.screentip=Show Message
conf_alm.set=Set
conf_alm.szAlarmSource=Source of alarm
conf_alm.szAlarmSourceSel=Local Input|Net Input
conf_alm.szAlarmSourceSelnvs=Local Input|Net Input|Decoder Input
conf_alm.tocenter=Upload Center
conf_alm.videochannel=Channel
conf_alm.voicetip=Voice Prompts
conf_alm_event_type=Event Type
conf_alm_openclose=Enable
conf_alm_snap=Snapshot
conf_almin.delay=Anti-dither
conf_almin.inenable=Alarm In Enable
conf_almlinkage.ptznone=None
conf_atmpos.datafromnet=NetWork
conf_atmpos.destinationport=Target Port
conf_atmpos.displaypositionbottom=BOTTOM
conf_atmpos.displaypositiontop=TOP
conf_atmpos.group=Data Group1|Data Group2|Data Group3|Data Group4
conf_atmpos.sniffergroup=Data Group
conf_batteryKey=V
conf_batteryline=Battery Voltage
conf_com.bps=Baudrate
conf_com.cardrec=Card reader recording channel
conf_com.channel=Record Channel
conf_com.comfunc=Function
conf_com.comfunction=Console|KeyBoard|Adapter|ATMCom|NetKeyBoard|GuaoCom|Red Apple|Banknote|BOCOM|Annunciator|PTZMatrix|RTM Keyboard|Alarm Decorder|BOSCH|CardReader|Annunciator|ITS|POS|YDVS|GeneralCOM
comm_protocol_cdma=CDMA
conf_com.databit=Data Bits
conf_com.doorrec=Safety door recording channel
conf_com.rever=
conf_com.stopbit=Stop Bits
conf_com.vdataBIT4_8=4 bit|5 bit|6 bit|7 bit|8 bit
conf_com.veriNO_ODD_EVEN=None|Odd |Even|Mark|Space
conf_com.verify=Parity
conf_com.vstpBIT1_2=1 bit|1.5 bit|2 bit
conf_dst.day=Date
conf_dst.endtime=End:
conf_dst.starttime=Start:
conf_dst.week=Day of Week
conf_dst.weekday=1st|2nd|3rd|4th|Last
conf_gen.alarmenable=Enable alarm
conf_gen.at=at
conf_gen.autodelete=Auto-Delete Old Files
conf_gen.autoopen=Auto Boot up
conf_gen.autoreboot=Auto-Reboot System
conf_gen.autoshut=Auto Shutdown System
conf_gen.barnum=Bar NO.
conf_gen.carno=Car No.
conf_gen.cityno=City No.
conf_gen.companyno=Company No.
conf_gen.custom=Customized
conf_gen.dateformat=Date Format
conf_gen.dateformatsel=YYYY MM DD|MM DD YYYY|DD MM YYYY
conf_gen.datespector=Date Separator
conf_gen.datespectorsel=.|-|/
conf_gen.datetime=System Time
conf_gen.dayago=Day(s) Ago
conf_gen.daylightsavingtime=DST
conf_gen.daylightsavingtimerules=DST
conf_gen.daylightset=Set
conf_gen.deletetime=Never|Customized
conf_gen.hddover=HDD Full
conf_gen.hsdownload=NoLimit|Customized
conf_gen.hsdownloadbitrate=DownloadBit
conf_gen.hsdownloadvalue=KB
conf_gen.languagesel=Language
conf_gen.lcdclsdowntime=LCD ShutDown
conf_gen.lugrev=
conf_gen.manualstart=Available When Start
conf_gen.manualstop=Available When Stop
conf_gen.minute=min.
conf_gen.openday=INVALID|VALID
conf_gen.rebootday=Never|Everyday|Every Sunday|Every Monday|Every Tuesday|Every Wednesday|Every Thursday|Every Friday|Every Saturday
conf_gen.reclen=Pack Duration
conf_gen.remoteaddr=Device No.
conf_gen.shutday=Never|Everyday|Every Sunday|Every Monday|Every Tuesday|Every Wednesday|Every Thursday|Every Friday|Every Saturday
conf_gen.shutdelay=Acc Delay
conf_gen.simprovince= |京|津|沪|渝|冀|晋|辽|吉|黑|苏|浙|皖|闽|赣|鲁|豫|湘|鄂|粤|琼|蜀|贵|云|陕|甘|青|台|藏|蒙|桂|宁|新
conf_gen.snapinterval=Snapshot
conf_gen.standbytime=Auto Logout
conf_gen.startoption=Today|For Ever
conf_gen.startoutput=Display Mode
conf_gen.startoutputtype=Self-adaptive|VGA|TV
conf_gen.stopoption=Today|Until Trigger
conf_gen.timeformat=Time Format
conf_gen.timeformatsel=24-HOUR|12-HOUR
conf_gen.vedimode=Video Standard
conf_gen.vlugsel606=ENGLISH|简体中文|繁體中文|ITALIANO|ESPAÑOL|日本語|РУССКИЙ|FRANCAIS|DEUTSCH|PORTUGUÊS|TURKEY|POLAND|ROMANIAN|HUNGARIAN|FINNISH|ESTONIAN|KOREAN|FARSI|DANSK|CZECHISH|BULGARIA|SLOVEKIAN|SLOVENIAN|Croatian|Dutch|Greek|Ukrainian|Swedish|Serbian|Vietnamese|Lithuanian|Filipino|Arabic|Catalan|Latvian|Thai|עברית
conf_gen.vlugselCH_EN=ENGLISH|简体中文|繁體中文|ITALIANO|ESPAÑOL|日本語|РУССКИЙ|FRANCAIS|DEUTSCH|PORTUGUÊS|TURKEY|POLAND|ROMANIAN|HUNGARIAN|FINNISH|ESTONIAN|KOREAN|FARSI|DANSK|CZECHISH|BULGARIA|SLOVEKIAN|SLOVENIAN
conf_gen.voverdoLAP_STP=Stop Record|Overwrite
conf_img.Brightness=Brightness
conf_img.Contrast=Contrast
conf_img.Gain=Gain
conf_img.Hue=Hue
conf_img.Saturation=Saturation
conf_img.alarmout=Alarm Output
conf_img.areacover=Area Cover
conf_img.audio=Audio
conf_img.autosetframe=Frame Adaptive
conf_img.bitratesize=Bit Size
conf_img.bitratevalue=Bit Rate(Kb/S)
conf_img.blind=Camera Mask Detect
conf_img.brcmode=Bit Rate Type
conf_img.brcsele=CBR|VBR
conf_img.channel1=CAM 1
conf_img.channel10=CAM 10
conf_img.channel11=CAM 11
conf_img.channel11_12=CAM 11-12
conf_img.channel12=CAM 12
conf_img.channel13=CAM 13
conf_img.channel13_14=CAM 13-14
conf_img.channel13_16=CAM 13-16
conf_img.channel14=CAM 14
conf_img.channel15=CAM 15
conf_img.channel15_16=CAM 15-16
conf_img.channel16=CAM 16
conf_img.channel17=CAM 17
conf_img.channel17_18=CAM 17-18
conf_img.channel17_20=CAM 17-20
conf_img.channel17_22=CAM 17-22
conf_img.channel17_24=CAM 17-24
conf_img.channel17_25=CAM 17-25
conf_img.channel17_32=CAM 17-32
conf_img.channel18=CAM 18
conf_img.channel19=CAM 19
conf_img.channel19_20=CAM 19-20
conf_img.channel1_2=CAM 1-2
conf_img.channel1_4=CAM 1-4
conf_img.channel1_6=CAM 1-6
conf_img.channel1_8=CAM 1-8
conf_img.channel1_9=CAM 1-9
conf_img.channel1_16=CAM 1-16
conf_img.channel1_25=CAM 1-25
conf_img.channel2=CAM 2
conf_img.channel20=CAM 20
conf_img.channel21=CAM 21
conf_img.channel21_22=CAM 21-22
conf_img.channel21_24=CAM 21-24
conf_img.channel22=CAM 22
conf_img.channel23=CAM 23
conf_img.channel23_24=CAM 23-24
conf_img.channel23_28=CAM 23-28
conf_img.channel24=CAM 24
conf_img.channel24_32=CAM 24-32
conf_img.channel25=CAM 25
conf_img.channel25_26=CAM 25-26
conf_img.channel25_28=CAM 25-28
conf_img.channel25_32=CAM 25-32
conf_img.channel26=CAM 26
conf_img.channel27=CAM 27
conf_img.channel27_28=CAM 27-28
conf_img.channel28=CAM 28
conf_img.channel29=CAM 29
conf_img.channel29_30=CAM 29-30
conf_img.channel29_32=CAM 29-32
conf_img.channel3=CAM 3
conf_img.channel30=CAM 30
conf_img.channel31=CAM 31
conf_img.channel31_32=CAM 31-32
conf_img.channel32=CAM 32
conf_img.channel3_4=CAM 3-4
conf_img.channel4=CAM 4
conf_img.channel5=CAM 5
conf_img.channel5_6=CAM 5-6
conf_img.channel5_8=CAM 5-8
conf_img.channel6=CAM 6
conf_img.channel7=CAM 7
conf_img.channel7_12=CAM 7-12
conf_img.channel7_25=CAM 7-25
conf_img.channel7_8=CAM 7-8
conf_img.channel8=CAM 8
conf_img.channel8_16=CAM 8-16
conf_img.channel8_32=CAM 8-32
conf_img.channel9=CAM 9
conf_img.channel9_10=CAM 9-10
conf_img.channel9_12=CAM 9-12
conf_img.channel9_16=CAM 9-16
conf_img.channelsplitpip2+3=CAM 2-3
conf_img.channelsplitpip2+4=CAM 2-4
conf_img.channelsplitpip2_4=CAM 2-3-4
conf_img.channelsplitpip3+4=CAM 3-4
conf_img.codemode=Compression
conf_img.colorset=COLOR SETTING
conf_img.cover=Cover-Area
conf_img.coverset=Set
conf_img.covertype=Cover-Type
conf_img.covertypeval=Preview|Monitor|All
conf_img.extfun=Extra Stream
conf_img.fps=Frame Rate(FPS)
conf_img.fpssel_ntsc=1  FPS|2  FPS|4  FPS|7  FPS|15 FPS|20 FPS|30 FPS
conf_img.fpssel_pal=1  FPS|2  FPS|3  FPS|6  FPS|12 FPS|25 FPS
conf_img.fpsselntsc=1|2|3|4|5|6|7|8|9|10|11|12|13|14|15|16|17|18|19|20|21|22|23|24|25|26|27|28|29|30
conf_img.fpsselpal=1|2|3|4|5|6|7|8|9|10|11|12|13|14|15|16|17|18|19|20|21|22|23|24|25
conf_img.frame=FPS
conf_img.kbps=Kbps
conf_img.khz=KBPS
conf_img.monitor=Monitor
conf_img.motion=Motion Detect
conf_img.name=Name
conf_img.overlap=OVERLAY
conf_img.period=Period
conf_img.preview=Preview
conf_img.protection=Protection
conf_img.quality=Quality
conf_img.recmodes=Regular|MD|Alarm
conf_img.rever=
conf_img.screentip=Show Message
conf_img.setbitratesize=No Limit|64K |128K |256K |512K |768K |1M 
conf_img.snap=SNAPSHOT
conf_img.snapenable=Enable Snap
conf_img.snapframe=Snapshot Frequency
conf_img.snapframereal=1 SP2L|1 SPL|2 SPL|3 SPL|4 SPL|5 SPL|6 SPL|7 SPL
conf_img.snapmode=Mode
conf_img.snapmodesele=Timing|Trigger
conf_img.snapqulity=Image Quality
conf_img.snapset=SNAPSHOT
conf_img.snapsize=Image Size
conf_img.suggestbitrate=Reference Bit Rate
conf_img.video=Video
conf_img.videolock=Monitor Lock
conf_img.videoloss=Video Loss
conf_img.vidsize=Resolution
conf_img.volume=Volume Min
conf_img.whitebalance=White Level
conf_img.whitelevel=low|middle|high
conf_main.abtsettip=Abnormal parameter setup including alarm output,screeen prompt and etc.
conf_main.almsettip=Setting of exterior alarm output and responding record functions.
conf_main.cameratip=Settings for cameras and pictures.
conf_main.comctrltip=Settings for serial port function and baud rate.
conf_main.gensettip=Configure Date, Time and display format; Set record file length; Change language; Configure DVR remote control address.
conf_main.imgsettip=Configure the recording frame rate and image quality for each camera; Start/stop audio recording.
conf_main.mtdsettip=Configure all video detection parameters: active area, sensitivity levels, alarm output, etc.
conf_main.netsettip=Setup network parameters: IP address, subnet mask, default gateway, TCP/IP ports.
conf_main.outmodetip=Settings for GUI and monitoring parameters.
conf_main.ptzctrltip=Configure PTZ cameras: protocol, communication parameters, and communication address.
conf_main.rever=
conf_main.timingtip=Configure the recording time; Activate/deactivate timing, alarm and motion triggered recording.
conf_mtd.area=Region
conf_mtd.delay=Latch
conf_mtd.index=No.
conf_mtd.output=Alarm Out
conf_mtd.prerec=PreRecord
conf_mtd.record=Record Channel
conf_mtd.regionset=Select
conf_mtd.repeat=Repeat
conf_mtd.rever=
conf_mtd.screentip=Show Message
conf_mtd.sens=Sensitivity
conf_mtd.senssel=Low|Middle|High
conf_net.Alarprotol=Private|Bosch|Self-defined
conf_net.DNS=DNS
conf_net.Dialenable=Enable
conf_net.DialupGW=Gateway
conf_net.DialupIP=IP Address
conf_net.DialupSM=Subnet Mask
conf_net.FileLen=file length
conf_net.FileLens=M
conf_net.FtpAlarm=alarm
conf_net.FtpAnonymous=Anonymous
conf_net.FtpChannel=channel
conf_net.FtpDirName=DirName
conf_net.FtpEnable=Enable
conf_net.FtpHostIp=Server IP
conf_net.FtpHostPort=Port
conf_net.FtpMd=motion
conf_net.FtpPassWord=Password
conf_net.FtpUserName=User Name
conf_net.FtpWeek=week
conf_net.GeneralProtoFtp=FTP Setting
conf_net.GeneralProtoNtp=NTP Setting
conf_net.GeneralProtoWeb=WEB Setting
conf_net.IPaddr=IP Address
conf_net.Interval=interval
conf_net.Intervals=min
conf_net.Mailsender=Sender
conf_net.NetFunctionAlarmCenter=Alarm upload centre setup
conf_net.NetStroage=NFS|FTP
conf_net.PrimaryDNSAddress=Preferred DNS
conf_net.Prototype=Protocol Type
conf_net.RemoteDeviceChannel=Remote Channel
conf_net.SendInterv=Event Interval
conf_net.SslEnable=SSL Enable
conf_net.StandbyDNSAddress=Alternate DNS
conf_net.WirelessAPN=APN
conf_net.WirelessDialup=Wireless Dial-up
conf_net.WirelessDialupNum=Dialup Num
conf_net.WirelessDialupPas=Password
conf_net.WirelessDialupUser=Account
conf_net.WirelessReg=Registered
conf_net.WirelessRegister=Dial-up Status
conf_net.WirelessStatus=Register Status
conf_net.WirelessType=Wireless Type
conf_net.WirelessUnReg=Unregistered
conf_net.addip=Add IP
conf_net.advancedset=NETWORK SETTING
conf_net.allowip=Allowed IP
conf_net.almcentor=ALARM SERVER
conf_net.busehighspeed=LAN Download
conf_net.carserverip=BUS Serverip IP
conf_net.ddns=DDNS
conf_net.ddns_name=User Name
conf_net.ddns_server_ip=Server IP
conf_net.ddns_server_port=Port
conf_net.ddns_type=DDNS Type
conf_net.ddnstypeen=Enable
conf_net.decoderset=Decorder Setting
conf_net.delallip=Delete All
conf_net.delip=Delete IP
conf_net.devtype=Device Type
conf_net.dfltgate=Gateway
conf_net.dnsprimary=Preferred DNS
conf_net.dnssecondary=Alternate DNS Server
conf_net.domainname=Domain Name
conf_net.emailset=EMAIL
conf_net.enableNTP=Enable
conf_net.filelength=File Length
conf_net.ftpalarm=Alarm
conf_net.ftpchan=Channel
conf_net.ftpday=Weekday
conf_net.ftpgeneral=General
conf_net.ftpmtd=Motion
conf_net.ftpset=FTP
conf_net.ftptransfertype=Record FTP|Image FTP
conf_net.ftptype=Type
conf_net.gmt+00=Greenwich Mean Time:Dublin,Edinburgh,Lisbon,London,Casablanca Monrovia,Reykjavik
conf_net.gmt+01=Amsterdam,Berlin,Bern,Rome,Stockholm,Vienna,Belgrade,Bratislava,Budapest,Ljubljana,Prague,Brussels,Copenhagen,Madrid,Paris,Sarajevo,Skopje,Warsaw,Zagreb,West Central Africa
conf_net.gmt+02=Amman,Aehens,Bucharest,Istanbul,Beirut,Cairo,Harare,Pretoria,Helsinki,Kyiv,Riga,Sofia,Tallinn,vilnius,Jerusalem,Minsk,Windhoek
conf_net.gmt+03=Baghdad,Kuwait,Riyadh,Moscow,St.Petersburg,Volgograd,Nairobi,Tbilisi,Tehran
conf_net.gmt+03:30=Tehran
conf_net.gmt+04=Abu Dhabi,Muscat,Baku,Tbilisi,Yerevan,Kabul    
conf_net.gmt+04:30=Kabul
conf_net.gmt+05=Ekaterinburg,Islamabad, Karachi, Tashkent ,Chennai, Kolkata, Mumbai, New Delhi, Kathmandu 
conf_net.gmt+05:30=Calcutta,Chennai,Mumbai,New Delhi
conf_net.gmt+05:45=Kathmandu
conf_net.gmt+06=Astana,Dhaka,Almaty, Novosibirsk,Rangoon     
conf_net.gmt+06:30=Yangon(Rangoon)
conf_net.gmt+07=Bangkok, Hanoi, Jakarta, Krasnoyarsk
conf_net.gmt+08=Beijing, Chongqing, Hong Kong, Urumqi, Kuala Lumpur, Singapore, Irkutsk,Ulaan Bataar,Perth,Taipei
conf_net.gmt+09=Seoul,Osaka, Sapporo, Tokyo,Yakutsk,Darwin,Adelaide
conf_net.gmt+09:30=Adelaide,Darwin
conf_net.gmt+10=Canberra, Melbourne, Sydney,Brisbane,Hobart,Vladivostok,Guam, Port Moresby
conf_net.gmt+11=Magadan, Solomon Is., New Caledonia
conf_net.gmt+12=Fiji, Kamchatka, Marshall Is., Auckland, Wellington    
conf_net.gmt+13=Nuku'alofa 
conf_net.gmt-01=Azores,Cape Verde Is
conf_net.gmt-02=Mid-Atlantic
conf_net.gmt-03=Newfoundland,Brasilia,Buenos Aires,Georgetown,Greenland,Montevideo
conf_net.gmt-03:30=Newfoundland
conf_net.gmt-04=Atlantic Time(C)
conf_net.gmt-05=Eastern Time (US &Canada),Indiana (East),Bogota, Lima, Quito, Rio Branco
conf_net.gmt-06=Central Time (US &Canada),Saskatchewan,Guadalajara, Mexico City, Monterrey,Central America 
conf_net.gmt-07=Mountain Time (US &Canada),Chihuahua, La Paz, Mazatlan, Arizona
conf_net.gmt-08=Pacific Time (US &Canada) Tijuana Baja California
conf_net.gmt-09=Alaska 
conf_net.gmt-10=Hawaii
conf_net.gmt-11=Midway Island, Samoa
conf_net.gmt-12=International Date Line West
conf_net.hostIP=Server IP
conf_net.hostPort=Port
conf_net.hostname=Host Name
conf_net.httpport=HTTP Port
conf_net.ipenable=Enable IP Filtering?
conf_net.ippowerset=IP FILTER
conf_net.mailreceiver=Receiver
conf_net.mailserver=SMTP Server
conf_net.maxconn=Max Connection
conf_net.monprotoc=Protocol
conf_net.msg_audio_dlg_now=Dialog now?
conf_net.msg_no_ddns_set=No Available DDNS Setup
conf_net.msg_restart_now=Restart to apply config?
conf_net.msg_set_ddns_failed=Please input DDNS setup!
conf_net.msg_set_gateway_failed=Set gateway failed!
conf_net.msg_usecfg_now=Apply the Config Immediately?
conf_net.muticastset=MULTICAST
conf_net.nas=Network Storage
conf_net.netmask=Subnet Mask
conf_net.ntpset=NTP
conf_net.pictureserverip=Video Server IP
conf_net.pppoe=PPPOE
conf_net.pppoe_password=Password
conf_net.pppoe_user_name=User Name
conf_net.pppoeip=IP
conf_net.protocol_set=Properties
conf_net.remotepath=Remote Directory
conf_net.replylist=Permitted IP List
conf_net.replynum=Maximum number of IP filter's is 64!
conf_net.restrict=Restricted Type
conf_net.restricttype=Trusted Sites|Blocked Sites
conf_net.sameip=The IP has existed!Add failed.
conf_net.selfreporttime=Selfreport Time
conf_net.serverip=Server IP Address
conf_net.serverset=Base Server
conf_net.snifferFrameId=Frame ID1
conf_net.snifferFrameId2=Frame ID2
conf_net.snifferFrameId3=Frame ID3
conf_net.snifferFrameId4=Frame ID4
conf_net.snifferFrameId5=Frame ID5
conf_net.snifferFrameId6=Frame ID6
conf_net.snifferdestIP=Destination IP
conf_net.snifferdestPort=Port
conf_net.snifferset=Data 
conf_net.sniffersrcIP=Source IP
conf_net.sniffersrcPort=Port
conf_net.standbyip=Alternate IP
conf_net.tcpport=TCP Port
conf_net.timeZone=Time Zone
conf_net.timesection1=Time Period 1
conf_net.timesection2=Time Period 2
conf_net.timetable=Effective Time
conf_net.title=Title
conf_net.transfertime=Upload Time
conf_net.transfertype=Transfer Mode
conf_net.transfertypecmb=Latency|Fluency|Self-adaptive
conf_net.udpport=UDP Port
conf_net.updateInterval=Update Period
conf_net.usedhcp=DHCP
conf_net.weburl=WEB URL
conf_net.wireless=Wireless Net
conf_out.alarmloop=Alarm Tour Type
conf_out.alpha=Transparency
conf_out.bottomspace=Bottom Deflate
conf_out.calibrate=Screen Calibration
conf_out.calibratehint=Please click the center point
conf_out.calibrateok=Screen calibration successful!
conf_out.cardinfo=Overlay Info
conf_out.carno=License NO.
conf_out.carnotitle=License NO
conf_out.channelname=Channel Name
conf_out.channeltitle=Channel Display
conf_out.cityname=CITY NAME
conf_out.color=Foreground|Background
conf_out.coordinatex=X
conf_out.coordinatey=Y
conf_out.enableloop=Enable Tour
conf_out.gpstitle=GPS Display
conf_out.interval=Interval
conf_out.intervalvideo=Interval
conf_out.leftspace=Left Deflate
conf_out.loop=Tour
conf_out.looptype=SPLIT1|SPLIT8
conf_out.matrix=Video Matrix
conf_out.matrixcontrol=MATRIX CONTROL
conf_out.matrixid=MatrixID
conf_out.matrixnote=Note:The linkage setting of Alarm and Motion Detect is in the page of ALARM and DETECT
conf_out.menuout=GUI
conf_out.menuskin_sel=Black  |Blue   |Argentine
conf_out.monitloop=Monitor Tour
conf_out.motionloop=Motion Tour Type
conf_out.no=No.
conf_out.pip=PIP
conf_out.resolution=Resolution
conf_out.rever=
conf_out.rightspace=Right Deflate
conf_out.second=sec.
conf_out.spt1=View 1
conf_out.spt12=View 12
conf_out.spt16=View 16
conf_out.spt2=View 2
conf_out.spt4=View 4
conf_out.spt6=View 6
conf_out.spt8=View 8
conf_out.spt9=View 9
conf_out.spt25=View 25
conf_out.spt36=View 36
conf_out.sptmode=Split Mode
conf_out.sptpip=View PIP
conf_out.sptpip1+1=View PIP1+1
conf_out.sptpip1+2=View PIP1+2
conf_out.temperaturetitle=Temperature Title
conf_out.timetitle=Time Display
conf_out.title=Title
conf_out.topspace=Top Deflate
conf_out.videolosstitle=NO SIGNAL
conf_out.videoout=Video Out
conf_out.videotitle=Video Matrix
conf_out.vogroup1=Group 1
conf_out.vogroup2=Group 2
conf_out.vogroup3=Group 3
conf_out.vogroup4=Group 4
conf_out.vogroup5=Group 5
conf_out.vogroup6=Group 6
conf_ptz.addr=Address
conf_ptz.addrerr=Address has been used
conf_ptz.bps=Baudrate
conf_ptz.databit=Data Bits
conf_ptz.monitor=Monitors
conf_ptz.protoc=Protocol
conf_ptz.rever=
conf_ptz.stopbit=Stop Bits
conf_ptz.vdataBIT4_8=4 bit|5 bit|6 bit|7 bit|8 bit
conf_ptz.veriNO_ODD_EVEN=
conf_ptz.verify=
conf_ptz.vstpBIT1_2=
conf_tim.prerecord=PreRecord
conf_tim.recsnaptype=Rec/SnapType
conf_tim.rectalarm=Alarm
conf_tim.rectgeneral=Regular
conf_tim.rectmd=MD
conf_tim.rectype=Record Type
conf_tim.rectypesele=Regular   MD   Alarm
conf_tim.redundancy=Redundancy
conf_tim.rever=
conf_tim.snapshot=Snapshot
conf_tim.timing1=Period 1
conf_tim.timing2=Period 2
conf_tim.timing3=Period 3
conf_tim.timing4=Period 4
conf_tim.timing5=Period 5
conf_tim.timing6=Period 6
conf_tim.timingOpt=Week Day
conf_tim.week=Week Day
conf_tim.weekday=Sun |Mon |Tue |Wed |Thu |Fri |Sat |All
conf_timeset.timesection=Period
conf_timetable.edittablename=Edit
conf_timetable.friday=Fri
conf_timetable.monday=Mon
conf_timetable.saturday=Sat
conf_timetable.scheduleset=Set
conf_timetable.section1=Section1
conf_timetable.section2=Section2
conf_timetable.section3=Section3
conf_timetable.section4=Section4
conf_timetable.section5=Section5
conf_timetable.section6=Section6
conf_timetable.sunday=Sun
conf_timetable.tablename=Table Name
conf_timetable.thursday=Thu
conf_timetable.timetable1=Table1
conf_timetable.timetable10=Table10
conf_timetable.timetable11=Table11
conf_timetable.timetable12=Table12
conf_timetable.timetable13=Table13
conf_timetable.timetable14=Table14
conf_timetable.timetable15=Table15
conf_timetable.timetable16=Table16
conf_timetable.timetable2=Table2
conf_timetable.timetable3=Table3
conf_timetable.timetable4=Table4
conf_timetable.timetable5=Table5
conf_timetable.timetable6=Table6
conf_timetable.timetable7=Table7
conf_timetable.timetable8=Table8
conf_timetable.timetable9=Table9
conf_timetable.tuesday=Tue
conf_timetable.wednesday=Wed
conf_workday.freeday=Free Day
conf_workday.select=Select
conf_workday.weekday=Sun|Mon|Tue|Wed|Thu|Fri|Sat|Work Day|Free Day
conf_workday.workday=Work Day
config.savefailed=Config Save Failed
config_DNS.AutoRegister=Obtain DNS server address automatically
config_DNS.ManualRegister=Use the following DNS server address
ctrl_ali.rever=
ctrl_alo.rever=
ctrl_main.alitip=Enable switching alarm input.
ctrl_main.alotip=Alarm output signal provided manually.
ctrl_main.automt=AUTO MAINTAIN
ctrl_main.automtstatic=Maintain switch
ctrl_main.automttip=Set automatic maintenance tasks.
ctrl_main.plytip=Set the maximum number of simultaneous display channels.
ctrl_main.pointtip=config record storage point of channels
ctrl_main.ptztip=Control focus, iris and direction of lens.
ctrl_main.recordtip=Start or stop recording of certain channels.
ctrl_main.rever=
ctrl_ptz.addpreset=Add Preset
ctrl_ptz.autopanon=AutoPan
ctrl_ptz.auxclose=Off
ctrl_ptz.auxdiroper=Direct Aux
ctrl_ptz.auxnooper=Aux Num
ctrl_ptz.auxoff=Aux Off
ctrl_ptz.auxon=Aux On
ctrl_ptz.auxopen=On
ctrl_ptz.auxtitle=AUX
ctrl_ptz.begin=Begin
ctrl_ptz.border=Border
ctrl_ptz.call=Goto
ctrl_ptz.camera=Lens
ctrl_ptz.campower=Scene Power
ctrl_ptz.cleartour=Del Tour
ctrl_ptz.cruise=Tour
ctrl_ptz.del=Delete
ctrl_ptz.delpreset=Del Preset
ctrl_ptz.direction=Direction
ctrl_ptz.end=End
ctrl_ptz.enter=Enter
ctrl_ptz.esc=Esc
ctrl_ptz.exit=Exit Menu
ctrl_ptz.flip=Flip
ctrl_ptz.focus=Focus
ctrl_ptz.function=Function
ctrl_ptz.iris=Iris
ctrl_ptz.lamprain=Lamp
ctrl_ptz.left=Left
ctrl_ptz.lightoff=Light Off
ctrl_ptz.lighton=Light On
ctrl_ptz.menu=Enter Menu
ctrl_ptz.nightsee=Light
ctrl_ptz.no=No.
ctrl_ptz.noneprotocol=No available control protocol for this channel. Set it in 'SETTING - PAN/TILT/ZOOM' page first!
ctrl_ptz.openclose=Open Close
ctrl_ptz.patrolno=Patrol No.
ctrl_ptz.pattern=Pattern
ctrl_ptz.preset=Preset
ctrl_ptz.ptz=Pan/Tilt/Zoom
ctrl_ptz.reserv=
ctrl_ptz.reset=Reset
ctrl_ptz.right=Right
ctrl_ptz.set=Set
ctrl_ptz.step=Speed
ctrl_ptz.stop=Stop
ctrl_ptz.switch=Page Switch
ctrl_ptz.tour=AutoScan
ctrl_ptz.trace=Ptz Trace
ctrl_ptz.wiper=Screen Wiper
ctrl_ptz.zoom=Zoom
ctrl_record.recset=RECORD
encodeoverlay.amount=Amount
encodeoverlay.count=Count
encodeoverlay.gps=°
encodeoverlay.humidity=Humidity
encodeoverlay.humiunit=％RH
encodeoverlay.machine=Machine No.
encodeoverlay.temperature=Temperature
encodeoverlay.tempunit=℃
encodeoverlay.value=Data Value
error.reccapstart=Don't start capture.
error.reccapstop=Don't stop capture.
error.recdiserr=Disk error.
error.recdisfull=Disk is full.
error.recfilecreat=Can't create recording.
error.recmanual=This setting is not allowed.
error.recnotvalid=Incorrect time.
error.timconflict=The time collides with others.
error.timerror=The start time should be earlier than the end time.
exit_main.logouttip=Password is needed to re-enter the menu after logout.
exit_main.reboottip=Exit system, then restart device.
exit_main.restarttip=Exit application, then restart it.
exit_main.shutdowntip=Exit system, then shut down device.
exit_main.switchuser=Switch the user and use another account to login.
exit_main_logout=Logout menu user
exit_main_restartapp=Restart application
exit_main_restartsys=Restart system
exit_main_shutdown=Shutdown
exit_switchuser=Switch user
ftpname.Snap=PIC
ftpname.record=record
info_alarm.DecAlm=DecAlm In
info_alarm.accbreak=ACC OFF
info_alarm.accresume=ACC Resume
info_alarm.arp=IP Conflicted
info_alarm.batterylow=Battery Low
info_alarm.bld=Mask
info_alarm.ext=Alarm In
info_alarm.highvol=H
info_alarm.ipconflict=IP Conflict
info_alarm.lowvol=L
info_alarm.mii=Net Disconnect
info_alarm.motion=Motion
info_alarm.rever=
info_alarm.temphigh=Temperature high
info_alarm.vls=Video Lost
info_bps.rever=
info_bps.wave=Wave
info_hdd.Nonehdd=No HDD
info_hdd.capa=Total Space
info_hdd.endtime=End Time
info_hdd.ide=IDE
info_hdd.info1=View type and capacity
info_hdd.info2=View recording times
info_hdd.master=Master
info_hdd.remaincapa=Free Space
info_hdd.rever=
info_hdd.sata=SATA
info_hdd.slave=Slave
info_hdd.starttime=Start Time
info_hdd.status=Status
info_hdd.type=Type
info_log.endtime=End Time
info_log.logAddGroup=Add Group <%s>
info_log.logAddUser=Add User <%s>
info_log.logAlarm=Local Alarm:%d
info_log.logAlarmEnd=Alarm End:%d
info_log.logAutomaticRecord=REC Auto:%s
info_log.logBackup=Backup [ch%d %s]
info_log.logBackupError=An error occured during backup
info_log.logBlindEnd=Camera Masking:%d
info_log.logBlindIn=Video Blind In:%d
info_log.logClear=Log Cleared
info_log.logClosedRecord=REC Closed:%s
info_log.logConfLoad=Load %s Config!
info_log.logConfSave=Save %s Config!
info_log.logDeleteGroup=Delete Group <%s>
info_log.logDeleteUser=Delete User <%s>
info_log.logFSError=File System Error!
info_log.logFilter=Filter
info_log.logFilterTip=Select the filter items
info_log.logHddFormat=Format Hdd<%d>
info_log.logHddNoSpace=Working HDD free space percentage:%d%%.
info_log.logHddRead=Read Hdd<%d> Error [%x]
info_log.logHddType=Modify Access Property of HDD<%d>
info_log.logHddTypeRE=Modify Access Property of HDD<%d> is Redundant
info_log.logHddTypeRO=Modify Access Property of HDD<%d> is ReadOnly
info_log.logHddTypeRW=Modify Access Property of HDD<%d> is ReadWrite
info_log.logHddTypeSS=Modify Access Property of HDD<%d> is SnapShot
info_log.logHddWrite=Write Hdd<%d> Error [%x]
info_log.logLogin=<%s>User Login
info_log.logLogout=<%s>User Logout
info_log.logLossEnd=Video Loss End:%d
info_log.logLossIn=Video Loss:%d
info_log.logManualRecord=REC Manual:%s
info_log.logManualRecordStart=REC Start:%s
info_log.logManualRecordStop=REC Stop:%s
info_log.logModifyGroup=Modify Group <%s>
info_log.logModifyUser=Modify User <%s>
info_log.logMotionEnd=Motion Detection Completed:%d
info_log.logMotionIn=Motion Detect:%d
info_log.logNetAlarm=Net Alarm:%d %s
info_log.logReboot=Reboot with Flag [0x%02x]
info_log.logRecDownload=Download [ch%d %s]
info_log.logRecPlayback=Playback [ch%d %s]
info_log.logRecPlaybackFile=Playback File [ch%d %s]
info_log.logRecPlaybackStop=Stop Playback [ch%d %s]
info_log.logRecSearch=Search [ch%d %s]
info_log.logRecSearchStop=SearchStop[%s]
info_log.logRecSearchstart=SearchStart[%s]
info_log.logSearch=Search Log!
info_log.logSelAccount=Account
info_log.logSelAlarm=Alarm
info_log.logSelAll=All
info_log.logSelClear=Clear
info_log.logSelConfig=Config
info_log.logSelPlayback=Playback
info_log.logSelRecord=Record
info_log.logSelStorage=Storage
info_log.logSelSystem=System
info_log.logShut=Shut down at [%s]
info_log.logUnknown=Unknown Log
info_log.logamendgateway=gateway modify[%d.%d.%d.%d]
info_log.logamendip=ip modify[%d.%d.%d.%d]
info_log.logamendsubmask=submask modify[%d.%d.%d.%d]
info_log.logatmset=ATM/POS setup
info_log.logguiset=GUI setup
info_log.logtitle=   Log Time               Event
info_log.logtype=Type
info_log.removeall=Clear
info_log.search=Search
info_log.starttime=Start Time
info_log.suretoclear=Are you sure you want to remove all logs?
info_log.sysemupgrade=System Upgrade
info_main.alarmtip=Display exterior alarm, motion detecton, video loss alarm state.
info_main.bpstip=Display bit rate of each channel and data consumption rate.
info_main.hddinfotip=IDE connection state, information for all installed hard disks. The number with * represents the current operating HDD.
info_main.logtip=Display system logs of critical events.
info_main.rever=
info_main.satainfotip=SATA connection state, information for all installed hard disks. The number with * represents the current operating HDD.
info_main.versiontip=Display hardware information, software version and build date.
info_onlineuser.Block=Block for
info_onlineuser.KickUser=Disconnect
info_onlineuser.OnlineUser=User Name
info_onlineuser.OnlineUserAccount=Account
info_onlineuser.OnlineUserIP=IP
info_onlineuser.OnlineUserNONE=None
info_onlineuser.OnlineUserTip=Display Online Users.
info_sd.plugin=Plug in SD card
info_sd.plugout=Plug out SD card 
info_ver.MacAddr=MAC ADDRESS
info_ver.Type=Model
info_ver.alarmin=Alarm In
info_ver.alarmout=Alarm Out
info_ver.channels=Channels
info_ver.hardver=Hardware
info_ver.machinename=DVR Name
info_ver.nofile=Open file failed!
info_ver.nousb=No USB disk!
info_ver.releasedate=Build Date
info_ver.rever=
info_ver.serialnumber=Serial No.
info_ver.sysver=System
info_ver.updateValidate=Updata Register Code
info_ver.upgrade=If you need to upgrade system now,please insert USB upgrade disk,then press the start button to start upgrade.Don't shut down the power during upgrade!  
info_ver.upgradefailed=Upgrade Failed!
info_ver.upgradesucceed=Upgrade Succeeded.Press OK to reboot system!
info_ver.upstart=Start
info_ver.validate=Period of validity
info_ver.webver=Web
info_ver.numbertwo=Ⅱ
info_ver.VideoMonitorServer=Monitor Server
pgaddr.addr=Address
pgaddr.remoteaddr=REMOTE ADDRESS
pgmain.advcseltip=User (local and online) administration; harddisks management; setup video output parameters.
pgmain.backuptip=Backup recorded files onto other mediums through CDRW drive or USB harddrives.
pgmain.logouttip=Logout the OSD menu or reset/restart the system. After idle for standby time (no inputs), the system will exit OSD automatically.
pgmain.rever=
pgmain.searchtip=Search for and playback recorded video files by Date/Time, Alarms, or Motion. 
pgmain.sysinfotip=Display system statistics: Harddisk status; current online users; recording bitrate; system access logs; current software version.
pgmain.syssettip=View and modify system configuration parameters: date and time; recording schedule; recording frame 
pgmain.syssettip_NVR=View and modify system configuration parameters: date and time; recording schedulerate and image quality; network parameters; and system functions.
pgpsw.inputSerialError=Register Code is error
pgpsw.inputSerialNumber=Register Code
pgpsw.inputSerialOld=Register Code is out of date
pgpsw.inputpsw=SYSTEM LOGIN
pgpsw.rever=
pgquick.imgconf=Color Setting
pgquick.lock=Manual Lock
pgquick.logout=Log Out
pgquick.mainmenu=Main Menu
pgquick.manualrecord=Record
pgquick.ptzctrl=Pan/Tilt/Zoom
pgquick.quickalmin=Alarm Input
pgquick.quickalmout=Alarm Output
pgquick.quicksearch=Search
pgquick.videomatrix=Video Matrix
sch_main.backfilename=File Name
sch_main.begintime=Start Time
sch_main.bktype=TIME|CAPACITY
sch_main.cdromplay=CD-ROM Play
sch_main.endtime=End Time
sch_main.filelen=Size(KB)
sch_main.filetype=Type
sch_main.genschtip=Exact search according to channel and time.
sch_main.infotitle=StartTime Type
sch_main.listschtip=Search according to recording type:all, regular, alarm, md(motion detection), result is displayed in list. R-regular, A-alarm, M-motion detection.
sch_main.nomatch=Can't find matching records!
sch_main.noselectchannel=You haven't selected the effective channel!
sch_main.play=Play selected record
sch_main.player=Play
sch_main.recchannel=Channel
sch_main.rever=
sch_main.search=Search
sch_main.serching=Searching, please wait...
sch_main.szCardNoMatch=The length of card number is out of range!
sch_main.szNoChannel=Please select the channel of the file to playback!
sch_main.szTipButtonBack=Play Backward
sch_main.szTipButtonFast=Fast Playback
sch_main.szTipButtonFullScr=Full Screen
sch_main.szTipButtonNextChan=Next Channel
sch_main.szTipButtonNextFile=Next File
sch_main.szTipButtonNextFrame=Next Frame
sch_main.szTipButtonPause=Pause
sch_main.szTipButtonPrevChan=Prev Channel
sch_main.szTipButtonPrevFile=Prev File
sch_main.szTipButtonPrevFrame=Prev Frame
sch_main.szTipButtonSlow=Slow Playback
sch_main.szTipButtonStart=Play
sch_main.szTipButtonStop=Stop
sch_main.szTipRepeatPlay=Repeat Playback
sch_main.time=Time
sch_main.type=Type
sch_main.typesel=All|Alarm|MD|Alarm/MD|Card
sch_main.typeIntel=Intelligent Record
sch_main.modesel=FOUR|ALL
sch_main.newmodesel=FOUR|ALL|1-16|17-32
sch_main.framesel=ALL-FRAME|I-FRAME
sch_main.szTipIFramePlay=ALL-FRAME/I-FRAME select
tips_channelname_failed=Channel name is too long! Save failed!
titles.OnlineUser=ONLINE USERS
titles.abtset=ABNORMALITY
titles.advcsel=ADVANCED
titles.alarm=ALARM STATUS
titles.ali=ALARM INPUT
titles.almset=ALARM
titles.almworksheet=Alarm Record Period
titles.alo=ALARM OUTPUT
titles.assistfunc=ASSIST FUNCTION
titles.atmpos=ATM/POS
titles.backup=BACKUP
titles.bkdata=BACKUP FILES
titles.bkdev=DETECT DEVICE
titles.bkload=CONFIG BACKUP
titles.bkrecord=Realtime Backup
titles.bps=BPS
titles.capa=Partition
titles.comctrl=RS232
titles.configchoice=Config Choice
titles.dataclear=DATA FORMAT
titles.decConf=DECODER SETUP
titles.eventset=EVENT
titles.gensch=QUICK SEARCH
titles.genset=GENERAL
titles.getdflt=DEFAULT
titles.groupset=GROUP setup
titles.hdderror=HDD Error
titles.hddinfo=HDD INFO
titles.hddmng=HDD MANAGE
titles.hddnospace=HDD No Space
titles.ifopen=Open
titles.imgset=ENCODE
titles.listsch=LIST SEARCH
titles.log=LOG
titles.logout=SHUTDOWN
titles.mainmenu=MAIN MENU
titles.mtdset=DETECT
titles.mtdworksheet=Video Detect Period
titles.netcamera=REMOTE DEVICE
titles.netset=NETWORK
titles.nohdd=No HDD
titles.outmode=DISPLAY
titles.ptz=PAN/TILT/ZOOM
titles.ptzctrl=PAN/TILT/ZOOM
titles.recalarmdetct=Record MD Alarm
titles.record=RECORD
titles.recworksheet=General Record Period
titles.screensaver=Screen saver
titles.search=SEARCH
titles.sysinfo=INFO
titles.sysset=SETTING
titles.systimeset=System Time
titles.sysupgrade=UPGRADE
titles.timetable=TIME TABLE
titles.timetableset=WorkSheet
titles.timing=SCHEDULE
titles.tvadjust=TV ADJUST
titles.ugmset=ACCOUNT
titles.userset=User Setup
titles.version=VERSION
titles.videomatrix=VIDEO MATRIX
ugm_addgroup.gauthority=Authority
ugm_addgroup.gmemo=Memo
ugm_addgroup.gname=Name
ugm_adduser.bandlimit=Band Limit
ugm_adduser.uauthority=Authority
ugm_adduser.ugroup=Group
ugm_adduser.umemo=Memo
ugm_adduser.uname=User
ugm_adduser.upwd=Password
ugm_adduser.ushare=Reuseable
ugm_authdisp.AuthorityDisp_01=Control Panel
ugm_authdisp.AuthorityDisp_02=Shutdown the Device
ugm_authdisp.AuthorityDisp_03=Monitor
ugm_authdisp.AuthorityDisp_04=  Monitor_CH01
ugm_authdisp.AuthorityDisp_05=  Monitor_CH02
ugm_authdisp.AuthorityDisp_06=  Monitor_CH03
ugm_authdisp.AuthorityDisp_07=  Monitor_CH04
ugm_authdisp.AuthorityDisp_08=  Monitor_CH05
ugm_authdisp.AuthorityDisp_09=  Monitor_CH06
ugm_authdisp.AuthorityDisp_10=  Monitor_CH07
ugm_authdisp.AuthorityDisp_11=  Monitor_CH08
ugm_authdisp.AuthorityDisp_12=  Monitor_CH09
ugm_authdisp.AuthorityDisp_13=  Monitor_CH10
ugm_authdisp.AuthorityDisp_14=  Monitor_CH11
ugm_authdisp.AuthorityDisp_15=  Monitor_CH12
ugm_authdisp.AuthorityDisp_16=  Monitor_CH13
ugm_authdisp.AuthorityDisp_17=  Monitor_CH14
ugm_authdisp.AuthorityDisp_18=  Monitor_CH15
ugm_authdisp.AuthorityDisp_19=  Monitor_CH16
ugm_authdisp.AuthorityDisp_20=	Replay
ugm_authdisp.AuthorityDisp_21=  Replay_CH01
ugm_authdisp.AuthorityDisp_22=  Replay_CH02
ugm_authdisp.AuthorityDisp_23=  Replay_CH03
ugm_authdisp.AuthorityDisp_24=  Replay_CH04
ugm_authdisp.AuthorityDisp_25=  Replay_CH05
ugm_authdisp.AuthorityDisp_26=  Replay_CH06
ugm_authdisp.AuthorityDisp_27=  Replay_CH07
ugm_authdisp.AuthorityDisp_28=  Replay_CH08
ugm_authdisp.AuthorityDisp_29=  Replay_CH09
ugm_authdisp.AuthorityDisp_30=  Replay_CH10
ugm_authdisp.AuthorityDisp_31=  Replay_CH11
ugm_authdisp.AuthorityDisp_32=  Replay_CH12
ugm_authdisp.AuthorityDisp_33=  Replay_CH13
ugm_authdisp.AuthorityDisp_34=  Replay_CH14
ugm_authdisp.AuthorityDisp_35=  Replay_CH15
ugm_authdisp.AuthorityDisp_36=  Replay_CH16
ugm_authdisp.AuthorityDisp_37=  Record
ugm_authdisp.AuthorityDisp_38=  Backup
ugm_authdisp.AuthorityDisp_39=	Hardisk Management
ugm_authdisp.AuthorityDisp_40=	Pan/Tilt/Zoom Control
ugm_authdisp.AuthorityDisp_41=User Account      
ugm_authdisp.AuthorityDisp_42=Query System Info
ugm_authdisp.AuthorityDisp_43=Alarm I/O Config
ugm_authdisp.AuthorityDisp_44=System Config
ugm_authdisp.AuthorityDisp_45=Query Log Info
ugm_authdisp.AuthorityDisp_46=Clear Log
ugm_authdisp.AuthorityDisp_47=System Update
ugm_authdisp.AuthorityDisp_48=Control the Device
ugm_authdisp.AuthorityDisp_49=Auto Maintenance
ugm_authdisp.AuthorityDisp_64=NetPreview
ugm_authdisp.AuthorityDisp_65=	NetPreview_CH01
ugm_authdisp.AuthorityDisp_66=	NetPreview_CH02
ugm_authdisp.AuthorityDisp_67=	NetPreview_CH03
ugm_authdisp.AuthorityDisp_68=	NetPreview_CH04
ugm_authdisp.AuthorityDisp_69=	NetPreview_CH05
ugm_authdisp.AuthorityDisp_70=	NetPreview_CH06
ugm_authdisp.AuthorityDisp_71=	NetPreview_CH07
ugm_authdisp.AuthorityDisp_72=	NetPreview_CH08
ugm_authdisp.AuthorityDisp_73=	NetPreview_CH09
ugm_authdisp.AuthorityDisp_74=	NetPreview_CH10
ugm_authdisp.AuthorityDisp_75=	NetPreview_CH11
ugm_authdisp.AuthorityDisp_76=	NetPreview_CH12
ugm_authdisp.AuthorityDisp_77=	NetPreview_CH13
ugm_authdisp.AuthorityDisp_78=	NetPreview_CH14
ugm_authdisp.AuthorityDisp_79=	NetPreview_CH15
ugm_authdisp.AuthorityDisp_80=	NetPreview_CH16
ugm_authdisp.AuthorityDisp_81=  Monitor_CH17
ugm_authdisp.AuthorityDisp_82=  Monitor_CH18
ugm_authdisp.AuthorityDisp_83=  Monitor_CH19
ugm_authdisp.AuthorityDisp_84=  Monitor_CH20
ugm_authdisp.AuthorityDisp_85=  Monitor_CH21
ugm_authdisp.AuthorityDisp_86=  Monitor_CH22
ugm_authdisp.AuthorityDisp_87=  Monitor_CH23
ugm_authdisp.AuthorityDisp_88=  Monitor_CH24
ugm_authdisp.AuthorityDisp_89=  Monitor_CH25
ugm_authdisp.AuthorityDisp_90=  Monitor_CH26
ugm_authdisp.AuthorityDisp_91=  Monitor_CH27
ugm_authdisp.AuthorityDisp_92=  Monitor_CH28
ugm_authdisp.AuthorityDisp_93=  Monitor_CH29
ugm_authdisp.AuthorityDisp_94=  Monitor_CH30
ugm_authdisp.AuthorityDisp_95=  Monitor_CH31
ugm_authdisp.AuthorityDisp_96=  Monitor_CH32
ugm_authdisp.AuthorityDisp_97=  Replay_CH17
ugm_authdisp.AuthorityDisp_98=  Replay_CH18
ugm_authdisp.AuthorityDisp_99=  Replay_CH19
ugm_authdisp.AuthorityDisp_100=  Replay_CH20
ugm_authdisp.AuthorityDisp_101=  Replay_CH21
ugm_authdisp.AuthorityDisp_102=  Replay_CH22
ugm_authdisp.AuthorityDisp_103=  Replay_CH23
ugm_authdisp.AuthorityDisp_104=  Replay_CH24
ugm_authdisp.AuthorityDisp_105=  Replay_CH25
ugm_authdisp.AuthorityDisp_106=  Replay_CH26
ugm_authdisp.AuthorityDisp_107=  Replay_CH27
ugm_authdisp.AuthorityDisp_108=  Replay_CH28
ugm_authdisp.AuthorityDisp_109=  Replay_CH29
ugm_authdisp.AuthorityDisp_110=  Replay_CH30
ugm_authdisp.AuthorityDisp_111=  Replay_CH31
ugm_authdisp.AuthorityDisp_112=  Replay_CH32
ugm_authority.Advanced=Advanced
ugm_authority.AlarmConfig=ALARM
ugm_authority.ComConfig=RS232
ugm_authority.DataFormat=Data Format
ugm_authority.DefaultConfig=DEFAULT
ugm_authority.EncodeConfig=ENCODE
ugm_authority.GeneralConfig=GENERAL
ugm_authority.ModifyLanguage=Language
ugm_authority.ModifyVideoMode=Video Format
ugm_authority.NetConfig=NETWORK
ugm_authority.OutputConfig=DISPLAY
ugm_authority.PtzConfig=PAN/TILT/ZOOM
ugm_authority.RecordConfig=SCHEDULE
ugm_authority.RecordDownLoad=Record DownLoad
ugm_authority.VideoConfig=DETECT
ugm_authority.RemoteDevice=REMOTE DEVICE
ugm_main.addgroup=Add Group
ugm_main.adduser=Add User
ugm_main.fntip=Enable/Disable Authority
ugm_main.modgroup=Modify Group
ugm_main.modpwd=Modify Password
ugm_main.moduser=Modify User
ugm_main.ugmset_tip=Account Management
ugm_main.userSt_Locked=Locked
ugm_main.userSt_LoginLocal=Login Local
ugm_main.userSt_LoginNet=Login Net
ugm_main.userSt_Normal=Normal
ugm_main.userSt_Stoped=Stopped
ugm_main.user_default=Default User
ugm_main.user_group=Group
ugm_main.user_name=User
ugm_main.user_status=Status
ugm_modgroup.group=GROUP
ugm_modpwd.confirm_passwd=Confirm
ugm_modpwd.old_passwd=Old Password
ugm_modpwd.passwd=New Password
ugm_moduser.user=User Name
ugm_msg.account_locked=The account has been locked
ugm_msg.account_used=The account has logged in.
ugm_msg.add_group_exist=The group name already exists!
ugm_msg.add_group_succeeded=Successfully add a user group.
ugm_msg.add_user_exist=The user name already exists!
ugm_msg.add_user_succeeded=Successfully added a new user.
ugm_msg.can_not_del_this_user=You cannot remove the reserved user.
ugm_msg.can_not_mod_this_user=You cannot modify the reserved user.
ugm_msg.del_group_inuse=Please make sure you have deleted all the users in current group.
ugm_msg.del_group_succeeded=Successfully deleted the group user.
ugm_msg.del_user_succeeded=Successfully deleted the user.
ugm_msg.do_faied=The operation failed.
ugm_msg.empty_name=Please input a name first!
ugm_msg.group_name_invalidchar=The operation failed! There is invalid string in the group name.
ugm_msg.group_too_many=The user group amount has reached the threshold.
ugm_msg.mod_group_name_failed=Cannot modify the reserved user group name.
ugm_msg.mod_group_succeeded=Successfully modified the user group.
ugm_msg.mod_passwd_succeeded=Successfully modified the password.
ugm_msg.mod_user_name_failed=Can not modify the reserved user name. 
ugm_msg.mod_user_succeeded=Successfully modify the user. 
ugm_msg.no_purview=You have not right to modify other user groups.
ugm_msg.passwd_not_match=The passwords you input are not identical.
ugm_msg.passwd_not_valid=Invalid password. 
ugm_msg.save_cfg_failed=Failed to save the configuration information.
ugm_msg.save_encodecfg_failed=The system resources are not sufficient now. Please make sure D1 resolution of each channel is less than %d frames.  
ugm_msg.sure_to_delete=Do you really want to remove now?
ugm_msg.user_name_invalidchar=The operation failed. There is invalid string in the user name. 
ugm_msg.user_password_invalidchar=The operation failed. There is invalid string in the password. 
ugm_msg.user_too_many=The user amount has reached the threshold. 
************************************************************
info_log.netportbindfailed=Failed to bind the network port. 
conf_net.DNSaddr=DNS Address
*************************************************************
appEventFocus=Lose Focus
appEventPanorama=Switch Panorama

************************************************************
conf_net.preffered=Preferred
conf_img.qualitytype=Lowest|Lower|Low|High|Higher|Highest
conf_img.IFrame	=I Frame Interval 
conf_img.mainstream=Regular Stream
conf_img.streamtype=Regular|MD|Alarm
conf_img.audiotip=Audio Edit
pgplay.MsgBackUpConflict=Please backup the selected files first and then begin video clip and backup!
******************************2.62新增字符?**********************************
advc_hdd.vopsel7=Reserved Partition
advc_hdd.vopsel8=Backup Disk
info_log.logHddCapaFormat=Format Hdd<%s>
info_log.logHddCapaRead	=Read Hdd<%s> Error [%x]
info_log.logHddCapaWrite=Write Hdd<%s> Error [%x]
info_log.logHddCapaType	=Set to Disk<%s> Read-write Property
info_log.logHddCapaTypeRE=Set to Disk<%s> Redundant
info_log.logHddCapaTypeRO=Set to Disk<%s> Read Only
info_log.logHddCapaTypeRW=Set to Disk<%s>  Read-write
info_log.logHddCapaTypeSS=Set to Disk<%s>  Snapshot
info_log.logHddCapaTypeBK=Set to Disk<%s> Backup
info_log.logHddCapaTypeREVERSE=Set to HDD<%s> Reserved Partion
pgmain.searchtipnew=Search files by Type/Channel/Time, and then playback the files. Types include: R(Regular),A(Alarm),M(MD), H(Manual).
ugm_authdisp.AuthorityMoni_17=  Monitor_CH17
ugm_authdisp.AuthorityMoni_18=  Monitor_CH18
ugm_authdisp.AuthorityMoni_19=  Monitor_CH19
ugm_authdisp.AuthorityMoni_20=  Monitor_CH20
ugm_authdisp.Authorityplay_17=  Replay_CH17
ugm_authdisp.Authorityplay_18=  Replay_CH18
ugm_authdisp.Authorityplay_19=  Replay_CH19
ugm_authdisp.Authorityplay_20=  Replay_CH20
conf_com.comfunctionext=Console|KeyBoard|Adapter|ProtocolCom|NetKeyBoard|GuaoCom|Red Apple|Banknote|BOCOM|Annunciator|PTZMatrix|RTM Keyboard|Alarm Decorder|BOSCH|CardReader|Bocom Keyboard
PortError=Port 3800 is reserved for system background upgrade only.
comstring.comfilerecover=The system is restoring now. Please shut down the device properly the next time. 
comstring.comformatdisk	=System is formatting the disk now, do not turn off the power…
titles.formatdisk=Disk Format
titles.filesystem=File System
ugm_authdisp.AuthorityDisp_50=Clear Log
ugm_authdisp.AuthorityDisp_51=System Update
ugm_authdisp.AuthorityDisp_52=Control Device
ugm_authdisp.AuthorityDisp_53=Auto Maintenance
titles.disk_check=Disk Check
advc_hdd.check=Disk Check Setting
comstring.diskcheckpolicy=Check Policy
comstring.checkpolicyselect=Restart|EveryDay|EveryWeek|EveryMonth|Never
comstring.noauthoritymonitor=No monitor right!
info_log.lognoworkhdd=No working disk
conf_net.SearchIP=IP Search 
conf_net.DeviceName=Device ID
conf_net.IPaddr=IP Address 
conf_net.tcpport=TCP Port 
conf_net.chatype=Channel Type
conf_net.chaSelmode=Digital|Analog
pgplay.video_cut_num_max=It has exceeded the maximum amount of clipped footages.
pgplay.szTipButtonVideoCut=Video Clip
titles.datasource=TEXT OVERLAY
titles.ipset=IP Setting
conf_datasource.datasource=Sniffer Mode
conf_datasource.sourcechoose=COM|NET
conf_datasource.configset=Setting
conf_datasource.netdataset=IP Setting
conf_datasource.commdataset=Com Setting
conf_datasource.atmposset=ATM/POS
conf_datasource.protocolchoose=Protocol
conf_datasource.displaypositionchoose=Overlay Position
conf_datasource.displayposition=LeftTop|LeftBottom|RightTop|RightBottom
conf_datasource.displaychannel=Overlay Channel
conf_datasource.displaymode=Overlay Mode
conf_datasource.displaypreview=Preview
conf_datasource.displayencode=Encode
advc_main.datasourcetip=Select the data source of the communication protocol, protocol, overlay position, overlay channel and etc.
cardno=ACCOUNT
branchno=BRANCH
machineno=CODE
errorcode=EXCEPTION
transaction_amount=T MONEY
serialno=NUMBER
transaction_time=T TIME
transaction_type=T TYPE
other=OTHER
atm_card_str.cardsearch_types=CARD|FIELD
atm_card_str.transaction_types=--|INQ|CWD|PIN|TFR|DEP|NC-INQ|NC-DEP|Others
atm_card_str.error_types=--|S-Note|S-Card
INQUIRY=INQ
WITHDRAWAL=CWD
TRANSFER=TFR
DEPOSIT=DEP
NOCARDINQ=NCINQ
NOCARDDEP=NCDEP
RETRACT NOTE=RETNOTE
RETRACT CARD=RETCARD
conf_out.spt20=View 20
pgquick.maindisplay=Main/Aux Switch
comstring.decerror_inform=It has exceeded system decoding capacity. The playback or preview may not be fluent!
comstring.decerror_stop=It has seriously exceeded the decoding capacity, please stop operation in some channels.
comstring.decerror_unknown=There is no code stream from channel <%d>. Please stop right now.
comstring.decerror_unsupport=Do not support the stream mode from Channel <%d>. Please stop now.
comstring.decerror_resolution=Do not support the stream resolution from Channel <%d>. Please stop now.
comstring.decerror_manyresolution=There are too much playback resolutions. System can not enable channel <%d>. Please stop right now.
conf_net.cameratype=Resolution Type
conf_net.camerarating=Standard|High definition
pgquick.remotedevice=Remote Device
conf_net.manufacturer=Manufacturer
conf_net.MacAddr=Mac Address
advc_hdd.type_res=Reserved Disk
advc_hdd.partno=Partition
advc_hdd.type_unkown=Unknown Type
comstring.norecord=There are no results to display. Please select again.
pgquick.displaychange=Main/AUX Display
comm_console=Console
comm_dhkbd=Keyboard
comm_transcom=Adapter
comm_dhatm=ProtocolCom
comm_netkeyboard=NetKeyboard
comm_guaocom=GuaoCom
comm_redapple=Red Apple
comm_combanknote=Banknote
comm_bocom=BOCOM
comm_annunciator=Annunciator
comm_comptzmatrix=PTZMatrix
comm_xueyuan=RTM Keyboard
comm_alarmdecoder=Alarm Decoder
comm_bosch=BOSCH
comm_cardreader=CardReader
comm_pos=POS
comm_ydvs=YDVS
comm_generalcom=GeneralCom
comm_comits=ITS Com
Attach_Enable=Attachment
conf_ptz.ptztype=PTZ Type
conf_ptz.ptztypeenum=Local|Remote
appEventIPConflict=IP Conflicted
advc_bk.devicerunning=Device is in use now!
conf_out.Displayfrequency=Display refresh interval
conf_out.HZ=HZ
conf_tim.rectmdtalarm=MD&Alarm
advc_main.cfgbackuptip=Import or Export the Configuration
ctrl_ptz.presettime=Preset Stay Time
appEventAlarmExtended=Extension Alarm
pgquick.volume=Volume Control
title.pagesound=Volume Control
conf_sound.volume=Volume
bkup_data.importerror=The import failed.
bkup_data.Exportfinish=The backup is complete.
bkup_data.Importfinish=The import succeeded.
bkup_data.beingbackup=The backup is in process now, please wait...
advc_bk.nochoosedevice=Please select an export device first.
advc_data.setuptip=ATM/POS Function
bkup_data.nochoosedevice=Please select an import device first.
conf_net.DecorderPolicy=Decode Policy
conf_net.LocalDecorderPolicy=Latency Level3|Latency Level2|LatencyLevel1|Middle Level|Fluency level1|Fluency level2|Fluency level3
sch_main.modesel4=ONE|ALL
bkup_data.startlogbkup=Log Backup
bkup_data.device_busy=The device is busy now, please try later!
comstring.comtest=Test
Mail_Test=Mail Test
conf_out.subtitle=Customized Title
info_log.netcoderabort=Decoder Alarm
info_log.netcodercover=Decoder Alarm Reset
info_log.ipconflict=IP Conflicted
info_log.ipconflictrecover=IP Conflict Resume
info_log.netabortrecover=Net restores normal
info_ver.oemvendor=VENDOR
info_ver.oemtype=OEM TYPE
**************************************************************
conf_net.UPNP=UPNP
conf_upnp.portforwarding=PAT
conf_upnp.on=ON
conf_upnp.off=OFF
conf_upnp.status=UPNP Status
conf_upnp.statusvalue=Success|Error
conf_upnp.globalip=Router LAN IP
conf_upnp.wanip=WAN IP
conf_upnp.lanip=Local IP
conf_upnp.table=PAT Table
conf_upnp.service=Service Name
conf_upnp.servicename=Service Name
conf_upnp.protocol=Protocol
conf_upnp.intport=Int.Port
conf_upnp.extport=Ext.Port
conf_upnp.addlist=Add to the List
conf_upnp.delete=Delete
conf_upnp.portinfo=PORT INFO
conf_upnp.autosearch=AutoSearch
conf_upnp.searchinfo=Device List
conf_upnp.theirip=Online IP Address
**************************************************************
conf_tim.rectintell=Intelligent
conf.LoginErrorNo-0=Other network errors
conf.LoginErrorNo-1=Invalid password
conf.LoginErrorNo-2=The account does not exist.
conf.LoginErrorNo-3=The login return time is up.
conf.LoginErrorNo-4=The account has logged in.
conf.LoginErrorNo-5=The account has been locked.
conf.LoginErrorNo-6=The account has been blacklisted.
conf.LoginErrorNo-7=System is busy now.
conf.LoginErrorNo-9=Can not find the network host.
conf.LoginErrorNo-33= Offline
comstring.monitorcannotuse=System is in full-channel playback, the network monitor function is invalid now. 
comstring.playdownloadcannotuse=System is in full-channel playback, the network playback or network download function is invalid now. 
**********VGA和TV双输出字符串
conf_out.splitOutptType=OutptType
conf_out.doubleOutput=Dual Output
conf_out.vgaOutput=VGAOutput
conf_out.tvOutput=TVOutput
tip_info1=Please input the plate information you got.
tip_info2=System only displays the first three results for the fuzzy search. 
vehicle_num=Please input the plate number. 
search=Search
pgvehicle_num_srh.noinputnum=Please input the correct plate number!
pgvehicle_num_srh.nomatchnum=There are no results to display.
pgvehicle_num_srh.openfailed=Failed to display the plate table. Please make sure the file exists. 
pgvehicle_num_srh.mountfailed=There is no USB device or SD card device.
pgvehicle_num_srh.srh=Plate Search
title.vehicle_num_srh=Plate Search
assist_func.vehicle_num_srh=Plate Search
advc_main.cgfbackuptip=Import or export the configuration via the backup device.
conf_net.WireLessSch=Wireless Search
net_wireless_3g=3G Wireless Network 
conf_net.vendor=Service Provider 
conf_net.nettype=Network Type
net_wireless_3gworkingstate=3G Working Status 
net_wireless_wifi=WIFI Wireless Network 
net_wirless.nowirelssmodulework=There is no wireless device or the wireless device has not been enabled. 
net_wireless_wifiworkingstate=WIFI Working Status 
net_wireless_WireLessSet=WIFI Setting 
net_wireless_WireLessCfg=Wireless Setting 
pg_cfgwifi_cnnt=WIFI Connection 
pg_cfgwifi_addlist=Static Setting 
pg_cfgwifi_enable=WIFI Enable 
pg_cfgwifi_refresh=Refresh
pg_cfgwifi_workinfo=WIFI Working Information
pg_cfgwifi_cur_useID=Current Hotspot  
pg_cfgwifi_cnnt_try=There is no preferred SSID.
pg_cfgwifi_noconnt=No connection
pg_cfgwifi_SSID=SSID
pg_cfgwifi_state=Connection Status 
pg_cfgwifi_nocnnt=Disconnected
pg_cfgwifi_Signal=Connection Signal 
pg_cfgwifi_Pri=Priority 
pg_cfgwifi_sftype=Verification Type 
pg_cfgwifi_Encrypt=Encrypt Type 
pg_cfgwifi_Pwd=Connection Password 
pg_cfgwifi_Connect=Connection 
pg_cfgwifi_openfirst=Please enable the WIFI function. 
pg_cfgwifi_connecting=Connecting now…
pg_cfgwifi_connected=Connected 
pg_cfgwifi_nosignal=No signal 
pg_cfgwifi_connectfailed=Connection failed. 
pg_cfgwifi_signalveryweak=Very weak 
pg_cfgwifi_signalweak=Weak
pg_cfgwifi_signalok=General 
pg_cfgwifi_signalgood=Strong 
pg_cfgwifi_signalperfect=Very strong 
pg_cfgwifi_deleteitem=Delete 
pg_cfgwifi_sftype=Security Type 
pg_cfgwifi_encryprion=Verification Type 
pg_cfgwifi_signal=Signal Intensity 
pg_cfgwifi_priority=Priority 
pg_cfgwifi_save=Save status 
comstring.wifi_deleteerr=An error occurred when deleting the WIFI device. Please select the remove priority again. 
comstring.comrefresh=Refresh 
conf_3g.enable=3G Enable
conf_3g.activate=Activate
conf_tim.working=Working Period 
conf_3g.nettype=Network Type
conf_3g.APN=APN
conf_3g.dialnum=Dial Number 
conf_3g.usrID=User Name 
conf_3g.PWD=User Password
conf_3g.Live=Pulse Interval  
conf_3g.registtitle=Registration Status 
conf_net.EVDO=EVDO Signal 
conf_net.CDMA=CDMA Signal 
net_wireless_3gSet=3G SETTING 
conf_3g.regist=Registered
conf_3g.no_regist=Has no registered

**************************************************************
log_info.time=Time
log_info.recoprtype=Type
log_info.recsearchstart=Go to search interface
log_info.recsearchstop=Exit search interface
log_info.recplayfile=Playback file
log_info.recplaystop=Stop playback
log_info.fileopr=File operation
log_info.saveconfig=Save
comstring.logtime=Log Time
comstring.loguser=Log User
comstring.logevent=Log Type
comstring.comprevone=Previous
comstring.comnextone=Next
info_log.moredetail=Details
bkup_data.startlogbDetail=Detailed Information
comstring.logtime=Log Time
log_info.logout=User logged out
log_info.login=User logged in
log_info.deluser=Delete user
log_info.delgroup=Delete user group
log_info.sysopr=System Operation
log_info.reboot=Boot up
log_info.shutdown=Shut down
log_info.update=Upgrade
log_info.recopr=Record Operation
log_info.recsearch=Record Search
log_info.recdown=Record Download
log_info.recplay=Record Playback
log_info.backup=Backup
log_info.backuperr=Backup failed
log_info.logclear=Log Clear
log_info.ugm=User Management

config.True=Yes
config.False=No
config.New=New Setting
config.Old=Old Setting
conf_img.Left=Left
conf_img.Top=Up
conf_img.Right=Right
conf_img.Bottom=Down
conf_img.Back=Background Color
conf_img.Front=Foreground Color
conf_img.none=N/A
Log_Event=Alarm Event
Log_RebootFlag=Reboot Symbol
Log_ShutTime=Shutdown Time
Log_EventStart=Event Begin
Log_EventEnd=Event End
Log_DeleteConfig=Delete config file
Log_EncodeStreamType=Encode Type
Log_Encode<Main+1>=General Main Stream
Log_Encode<Main+2>=Motion Detect Main Stream
Log_Encode<Ext>=Extra Stream
Log_Encode<Snap+1>=Schedule Snapshot
Log_Encode<Snap+2>=Activation Snapshot
Log_StartUp=Boot up
Log_Abort=Abnormal interruption
Log_Storage=Data Management
conf_net.netattr=Port Type
conf_net.netattrcmb=Self-adaptive|10M semi-duplex|10M full-duplex |100M semi-duplex|100M full-duplex
*********************************************以上2010.7.9 海外翻译版本*********************
log_info.cardrec=Card Record
log_info.manualrec=Manual Record
IP_or_GatWay_notvalid=IP or Gateway invalid,HiBit range must into 1 to 223
info_log.logHddInfo=Total HDD<%d>,Working HDD<%d>
info_log.logHddWorkingDisk=Change Working HDD to<%d>
conf_net.devtype_detail=DAHUA|Aebell
**************************************************************
sch_main.szNoVideo=no Record,please search more on other conditions!
sch_main.szTip=Synch
sch_main.typeAllVideo=All Record
sch_main.typeAlarmVideo=Alarm
sch_main.typeMotionVideo=Motion
sch_main.typeCommonVideo=Normal
sch_main.szTipButtonSlow3=Slow1
sch_main.szTipButtonSlow2=Slow2
sch_main.szTipButtonSlow1=Slow3
sch_main.szTipButtonSlow0=Slow4
sch_main.szTipButtonBackSlow3=UpendSlow1
sch_main.szTipButtonBackSlow2=UpendSlow2
sch_main.szTipButtonBackSlow1=UpendSlow3
sch_main.szTipButtonBackSlow0=UpendSlow4
sch_main.szTipButtonFast5=Fast1
sch_main.szTipButtonFast6=Fast2
sch_main.szTipButtonFast7=Fast3
sch_main.szTipButtonFast8=Fast4
sch_main.szTipButtonBackFast5=UpendFast1
sch_main.szTipButtonBackFast6=UpendFast2
sch_main.szTipButtonBackFast7=UpendFast3
sch_main.szTipButtonBackFast8=UpendFast4
file_source=From R/W HDD|From Snapshot HDD

bkup_data.bkupfinish=Backup finish
*********************************************硬盘Smart信息字符串******************
info_hdd.port=Port
info_hdd.modle=Modle
info_hdd.SerialNumber=Serial No.
info_hdd.smart_Status=Status
info_hdd.describe=Describe:
info_hdd.smart_ID=Smart ID
info_hdd.smart_Attributename=Attribute
info_hdd.smart_Threshold=Threshold
info_hdd.smart_AttributeValue=Value
info_hdd.smart_worst=Worst
info_hdd.smart_rawvalue=Initial Value
info_hdd.smart_ok=OK
info_hdd.smart_no=Error
titles.hddsmartinfo=Smart Info

conf_img.decoder_channel1=Digital Channel1
conf_img.decoder_channel1_4=Digital Channel1-4
conf_img.decoder_channel5_8=Digital Channel5-8
conf_img.decoder_channel9_12=Digital Channel9-12
conf_img.decoder_channel13_16=Digital Channel13-16
conf_img.decoder_channel2=Digital Channel2
conf_img.decoder_channel3=Digital Channel3
conf_img.decoder_channel4=Digital Channel4
conf_net.DecorderPolicyBuf=Decoder Buffer
conf_out.millisecond=msec 
config_ImageColor.notsupport_digchn=Digital Channel do not support Image Setting!
advc_main.imexporttip=Import or outport Configration.

AlarmUrgency=Urgency
AlarmFrontDoor=FrontDoor 
AlarmEndDoor=EndDoor 
AlarmLeftLight=LeftLight
AlarmRightLight=RightLight
AlarmBrake=Brake
AlarmDreverState=DreverState

advc_hdd.days=Days

**********************************2010.8.5*****************************
havingAlarm=Vehicle Alarm
conf_gen.speed=Subtitle Speed
conf_gen.frequency=Subtitle Frequency
conf_net.UID=UID
conf_net.hzzt=ZhiTong Setting
conf_net.configHZZT=HangZhou ZhiTong Setting
titles.usb_import=Media Management
advc_main.usb_import_tip=Media Import
usb_import.devlist=USB Device List
usb_import.imp_key_tip=Update media form USB device
usb_import.dev_err=Device Mount Failed
usb_import.imp_succ=Media Import Finished
usb_import.imp_failed=Media Import Failed
usb_import.format_key=Format
usb_import.format_key_tip=Format SD Card
usb_import.format_tip=Data will be erased and can't be can be restored
usb_import.format_ok=Format Finished
usb_import.format_error=Format Failed

comm_comits=ITS Com
conf_net.DeviceNO=Device sno
conf_net.VSName=Car NO.
conf_net.HsEnable=Heartbeat enable
conf_net.HsIP=Heartbeat srv IP
conf_net.HsPort=Heartbeat srv port
conf_net.HsIntervalTime=Heartbeat interval
conf_net.SrvHsMaxSurviveTime=keepalive time
conf_net.maxHsRetryTimes=Retry times
conf_net.RsEnable=Regist enable
conf_net.RsIP=Regist srv IP
conf_net.RsPort=Regist srv port
conf_net.RsAgedTime=Regist interval
conf_net.ConnPass=Device password
conf_net.GpsInfoSendRate=GPS report interval
conf_net.NetTransDelayCtl=Video trans delay control
conf_net.MessageInterval=Message Interval
conf_net.NewMessage=New Message
conf_net.MessageFache=Car Time
conf_net.message=Message Interval Time
conf_net.GpsInterval=GPS interval
conf_net.ReportAck=ACK interval
title.Alarm=Alarm
title.Message=Message
title.Dialog=Dialog
title.Accident=Accident
title.Tangle=Tangle
title.Malfunction=Malfunction
title.PageDown=PageDown
title.Cancle=Cancle
title.Congestion=Congestion
title.Crowd=Crowd	
title.Succor=Succor		
title.Overtake=Overtake
title.MoreStation=MoreStation
title.Pre=Pre
title.Next=Next
title.Dialog=Dialog starting...
title.fache=fache!
*************************************2010.8.20**************************
FTP_Test=FTP Test
FTP_State_OK=Connect OK
FTP_CONNECT_FAILED=Connect Failed
FTP_AUTH_FAILED=Authentication Failed
FTP_ERROR=Error
tilte.wizard=Startup Wizard
wizard.info=Startup Wizard:General, TV Adjust, Encode, Schedule, Record Control, NetWork.
wizard.start=Startup
wizard.next=Next Step
wizard.cancel=Cancel
wizard.prev=Pre Step
wizard.finish=Finished
wizard.complete=Startup Finished
wizard.tip=Are you sure you want to cancel Startup Wizard?
netCamera_info.cameratype_HD2SD=A standard definition remote device is connected to channel%d!
netCamera_info.cameratype_SD2HD=A high definition remote device is connected to channel%d!
netCamera_info.closechannel=It has exceeded the bit stream limit. Please close channel:
info_log.logHddInfoone=Disk totals
info_log.logHddInfotwo=Current working disk
info_log.hdd_beep_reset=Disk buzzer alarm reset
info_log.logHddOtherErrone=Disk other errors
info_log.logHddOtherErrtwo=Error 
info_hdd.badtrack=S.M.A.R.T. 
tips_badtrack_info=Important：There are more than 3 bad blocks on the disk! Please replace the corresponding disk in time!
conf_net_ftp.imagename=Picture Name                                                            
conf_net_ftp.imagesubpath=Subdirectories
conf_net_ftp.imagemaxnum=Max Amount 
conf_net_ftp.imageinstruction=After setup picture name,time string will auto add. 
info_log.ipconflictresume=IP Conflict Resume
info_log.timeupdate=Synchronize system time
conf.LoginErrorNo-8=Wrong version, login err.

conf.LoginErrorNo-10=Over the max connection
********************2010.9.9 俞鸿浩 增加解码器字符串********************************
conf_alm.name=Alarm name
conf_alm.MH.IN1=Left
conf_alm.MH.IN2=Right
conf_alm.MH.IN3=Reverse
conf_alm.MH.IN4=Brake
conf_alm.MH.IN5=Front door open
conf_alm.MH.IN6=Rear door open
conf_alm.MH.IN7=Alarm Input 
conf_alm.MH.IN8=Alarm Input 
 
conf_net_3G.control=3G flow control 
conf_net.3GFluxTactic=low use policy 
conf_net.3GFluxUp=Flow threshold (G)
conf_net.3GTimeUp=Time threshold (H)
conf_net.3GFluxUse=Current used flow(G)
conf_net.3GTimeUse=Current used time(H)
conf_net.3GUseMode=Flow amount in one month|Time length in one month
atm_ht_str.err_types=--|Smoke alarm|Go forward when in high level|Go backward when in high level|Temperature alarm
pg_adv_speedctrl=Vehicle speed alarm 
pg_adv_speedctrl_tip=Set vehicle alarm threshold when it is outside the bounds of the speed.
pg_adv_speedctrl_Upper=Maximum speed km/h
pg_adv_speedctrl_Lower=Minimum speed km/h
pg_adv_speedctrl_delaytime=Duration (s)
pg_adv_speedctrl_fail=Save failed. The maximun speed must be greater than minimun.
pg_adv_speedctrl_over=Warning：The speed is over the maximum.
pg_adv_speedctrl_low=Warning：The speed is below the minimum.
 ******************************* 2010.9.29 陈荣、徐丹华 增加车载字符串***********************
advc_hdd.badtrack_mild=Slight
advc_hdd.badtrack_commonly=Normal
advc_hdd.badtrack_badly=Serious
*******************************2010.9.29 彭建锋增加坏道字符串*******************************
conf_upnp.Success=Success
conf_upnp.Unknow=Searching
conf_upnp.Error=Error
conf_upnp.ServiceNameNotNull=The server name can not be null
conf_upnp.PortNotZero=The port can not be 0!
conf_upnp.RecordExisted=The current record already exists!
conf_upnp.CountToMany=The number of UPNP records cannot more than ten.
********************************2010.10.9 陈杰增加upnp字符串************************
ftp_msg.Path_name_invalidchar=Operation failed! The Pathname contains illegal characters.
*********************************2010.10.11 洪慧芬增加ftp目录提示字符串**************************
esata_dev.typestorage=Storage
titles.esata=eSATA
info_hdd.esata=eSATA
info_hdd.esataOperate=Operate
esata_dev.setstatus=Set Status
*********************************2010.11.17 eSATA增加字符串**************************
conf_img.spl=SPL
conf_net_3G.clear=Clear
ivplay.nomotionregion=There is no motion data in current region.
conf_alm.AlarmMethod=Trigger
config_alm.H_or_L=high|low
 
sch_main.szTipButtonVideoSnapShot=Current snap
log_info.closedrec=close
log_info.automaticrec=auto recording
log_info.netautoreg=auto register

info_alarm.mac=MAC Conflicted
appEventMacArp=MAC Conflicted
CurPos=Curent Page
AllPos=Total Page
JumpTo=Jump to

sch_main.mode9play=FOUR|NINE|ALL
conf_net.MailHealthTest=Health Test
**************************************2010.12.17 陈杰增加arp 、特殊9画面、健康检查等字符串*******************
ugm_authority.PatrimonyNumber=Serial number
InvalidPatrimonyNumber=Invalid serial number
**********************12 沈鹏 intelbras增加序列号*******************
conf_ArrowDire.FromLToR=L To R
conf_ArrowDire.FromRToL=R To L
conf_ArrowDire.Double=Double
conf_tim.rectIntell=Intelligence
titles.bkint=INTELLIGENCE
conf_itd.reset=RESET
conf_itd.rule=RULE
conf_itd.Dire=DIRECTION
conf_itd.Type=TYPE
conf_itd.TypeLine=Cross Line Detection
conf_itd.TypeRegion=Cross Region Detection
conf_itd.Add=ADD
conf_itd.Del=DEL
conf_itd.Redraw=REDRAW
conf_itd.Rulenum=Rule No.
conf_ArrowDire.Enter=Enter
conf_ArrowDire.Leave=Leave
conf_net.DelayTime=Switch Time
*****************************2010.12.20 翁杰智能协议*******************
conf_out.videotype=OUTPUT TYPE
conf_out.videotypechoice=TV|MATRIX
************************2010.12.29 徐爱微视频矩阵****************
Backup.NoSupportSmart=Backup Hdd not support smart search!
ugm_msg.overGroupCount=Groups Users has reached the maximum number!
ugm_msg.overUserCount=Users has reached the maximum number!
*****************************2011.1.10 陈杰用户管理***************
info_hddhealth.status_ok=Ok
info_hddhealth.status_mild=Slight
info_hddhealth.status_serious=Serious
info_hddhealth.status_failure=Failure
info_hddhealth.status_err=Error
conf_net.HealthEnable=Health Enable
conf_net.HealthInterval=Interval
titles.ChanHD=Channels Setting
titles.virHD=HDD Manager
advc_hdd.VirtuHDset=HDD Setting
advc_hdd.ChanHDset=HDD Channel
comstring.virHarddnum=HDD Group No.
advc_hdd.virHardd=HDD Group
comstring.configfinishremind=Config is in process.
*************************2011.1.21 彭建锋增加硬盘健康检查*********************** 
IFPlay=I frame fast play
MPlay=Smart Search
titles.recordReplace=Record control
DNS_notvalid=Set DNS invalid

titles.videospot=VIDEO MATRIX
log_info.dlegroup=Del Group
conf_img.CBR=CBR
conf_img.VBR=VBR
DNS_notvalid=DNS invalid,high-bit must be between 1 and 223.
info.log_time&event=Log Time & Event
titles.recordReplace=Record control
****************************2011-2.24~ 2011.2.12 徐爱微增加字符串***************
advc_hdd.StoragePosition=Oriented storage

conf_img.colormode=Color mode 
conf_img.colormodesel=----|Standard|Soft|Bright|Colorful
conf_img.colormodeset=----|Standard|Soft|Bright|Colorful|Bank
conf_img.colorcustomize=Customized color
bkup_data.fileformat=File Format
******************************2011.3.9 吴华剑增加N6字符串**********************
titles.watermark=Water Mark
conf_net.ServerNameInvalid=Server Name Invalid
conf_net.PortInvalid=Port Invalid
conf_net.updateSucceed=Update Succeed
conf_net.updateFailed=Update Failed
comNtp.manualUpdate=Manual Update
*************************2011.4 徐爱微和陈杰增加字符串*************************
conf_net.NTPserver=time.windows.com
conf_gen.hour=Hours
config_ntp.Update=Synchronize
*************************2011.4 陈贤斌和陈美英增加字符串*************************
advc_hdd.configremind=The configuration is not complete,are you sure you want to save?
conf_gen.displaytype=Out Type
conf_img.channel16_24=CAM 16-24
conf_img.channel9_24=CAM 9-24


conf_img.audioencode=Audio Format
conf_out.imagequalityincrease=Image Enhance 

*****徐耿增加混合相关字符串*****************
config_ImageColor.query_send_failed=The digital channel not enable or main stream query failed!
config_ImageColor.query_result_failed=Failed to query the image color!
netCamera_info.cameratype_HD2SD=A standard definition remote device is connected to the channel%d!
netCamera_info.cameratype_SD2HD=A high definition remote device is connected to the channel%d!
netCamera_info.closechannel=It has exceeded the bit stream limit. Please close channel:
conf.LoginErrorNo-8=Please check the version number.
conf.LoginErrorNo-10=The connection amount is full.
netCamera_info.Private=Private
netCamera_info.AEBell=AEBell
netCamera_info.Panasonic=Panasonic
netCamera_info.Sony=Sony
netCamera_info.Dynacolor=Dynacolor
netCamera_info.TCWS=TCWS(OEM version)
netCamera_info.Samsung=Samsung
netCamera_info.AXIS=AXIS
netCamera_info.YOKO=Legrand
netCamera_info.Onvif=Onvif
netCamera_info.Arecont=Arecont
conf_net.rtspport=RTSP Port

conf_net.rtspPort=RTSP Port
conf_net.tcpPort=TCP Port
conf_net.httpPort=HTTP Port
comstring.decerror_overload=The display capacity exceeded , will show blank screen!
comstring.confignotsupported=The configration querying and  modifying not supported！
comstring.IPCnotenabled=The digital channel is diable
comstring.getIPCcfgfailed=Failed to get configration

**************************************2011.6.20 翁杰增加解码器字符串 ********************
ugm_authdisp.DecodeTour=Display tour
ugm_authdisp.DecodeVideout=Decode tour
conf_nvd.TVAdjust=TV adjust 

titles.gpslog=GPSLOG
info_main.gpslogtip=Display system GPS logs.
**************************************2011.6.23 陈贤斌增加测试出来丢失的字符串 ********************
conf_net.ServerInvalid=ServerName Invalid

ctrl_ptz.switchpage=Please switch page to SPLIT1!
comstring.holidayset=Holidays Setting
conf_tim.holidayweek=Sun |Mon |Tue |Wed |Thu |Fri |Sat |Holiday|All

advc_main.intelliengence=Alarm over the line 
 ******************************************608 新功能增加字符串*****************************
encodeoverlay.light=light
encodeoverlay.lightuint=lux

wizardnvr.info=Startup Wizard:General, Schedule, Record Control, NetWork.

conf_net.ethDevices=eth0|eth1|bond0
conf_net.ethDevName=Network Device Name
conf_net.NetBind=network bind
****************************************2011.7.1 ~ 2011.7.18 增加字符串**********************
encodeoverlay.longitude_east=East Longitude
encodeoverlay.longitude_west=West Longitude
encodeoverlay.latitude_north=North Latitude
encodeoverlay.latitude_south=South Latitude

pg_cfgwifi_pwd_warning=Password length is not less than 5 
pg_cfgwifi_del_pro1=Please select delete item 
pg_cfgwifi_del_pro3=Cover the current priority ?
conf_net.edge=EDGE Signal
conf_net.wcdma=WCDMA Signal

advc_hdd.virdiskgroup=HDD No.    HDD Group
advc_hdd.virchngroup=Channel    HDD Group

comstring.cifseterror=Resolution Invalid

info_log.cfgExport=Config Export
info_log.cfgImport=Config Import
info_log.alarmOut=Alarm Out

info_log.logdhfs=HardDisk
info_log.logdisc=Mobile HD
info_log.logcdrw=CDROM

conf_itd.ruleTypes=Cross Line|Cross Region|Paste|Left|Preservation|Stay|Wander|Move|Tail|Rioter|Fire|Smoke|Fight|Flow|Number|Camera Coverd|Camera Moved|Video Abnormal|Video Bad|Face 

comstring.prevpage=PrePage
comstring.nextpage=NextPage

bkup_realBK.noCapacity=The space is insufficient, please insert a new USB Device
bkup_realBK.noDevice=No file to backup
bkup_reakBK.isStopRealBK=Backup is processing, abort now?
bkup_realBK.isOpenedFileBK=Being realtime backup, Please exit menu
bkup_realBK.deviceStarted=Being backup, Please Waiting
bkup_data.realtimebackup=Realtime Backup
bkup_data.realbackup=Realtime Backup Recording
bkup_realBK.realBKStartTime=Start Time
bkup_realBK.realBKCurrentTime=Current Time
bkup_realBK.realBKError=An error has occured
bkup_realBK.realBKStopped=Backup Stopped
log_info.logsearch=Search Log

conf_net.IPVerSion=IP Version
conf_net.LinkAddr=LinkAddr
IPv6_Host_or_GateWay_Set_Error=IPv6 Params error
IPv6_Host_GateWay_DNS_NotEmpty=IPv6's HostIP GateWay DNS can not empty
IPv6_Format_Error=IPv6 format error
comstring.comapply=Apply

comstring.resolutionchange=Encode resolution has changed!

please_save_cfg=config changed,please save first!
cfgwifi_SSID_NO_NULL=SSID can not empty
net_wireless_wifiSet=WIFI SETTING

file_lock.ctrl_unlock=Unlock
file_lock.title_lockfile=FileLock
file_lock.lock=Lock
file_lock.info_looklock=Locked Info

bkup_data.cutovernumer=Video cut number exceeded!!!
comstring.commanual=Manual Dail
sch_main.szTipPlay=Play forward
sch_main.szTipPlayBack=Play backward
conf_img.osdEnlarge=Enlarge
pg_cfgwifi_Attribute=Attribute
pg_cfgwifi_DisConnect=DisConnect

bkup_data.listtoolarge=Backup files number is exceeded！
conf_net.tdscdma=TD Signal
conf_net.edge=EDGE Signal
conf_net.wcdma=WCDMA Signal
InValidMode=Invalid System Record Mode,Reset To Default

conf_img.recmodes_me_s=Regular|Alarm

speed=speed
config_com.speed=speed
config_com.kmmark=KM mark
conf_com.WorkMode=com mode
conf_com.High_Low=LED|Printer
conf_out.train1=Train1
conf_out.train2=Train1

conf_nvd.OverDecPower=Over decode ability
pg_cfgwifi_inputPwd=please input password 

conf_net.ethMode=Net Mode
conf_net.ethWorkMode=Multi-address|Fault Tolerance|Load Balance
conf_net.ethDefault=Default Ethernet Port
conf_net.ethPrimary=Primary Port
conf_net.ethIpConflict=IP of eth0 and eth1 Conflict, Please reset!
save_ip_failed=IP address Save Failed!
conf_net.EncryptType=Encrypt Type

conf_net.getTarget=Storage Path Setting
conf_net.iSCSI=iSCSI Setting

titles.outputsetup=Output Setting
titles.devicemanager=Devices Manager
net_keyboard.deviceID=DeviceID
net_keyboard.outputID=OutputID
net_keyboard.outputindex=TV ID
comstring.Manualadd=Add
comstring.skip=Skip
comstring.selectitemtodel=Please select Items to Delete 
comstring.selectitemtomod=Please select Items to Modify
comstring.suretodelete=sure to delete？
net_keyboard.IDRepeat=ID is exist,please input other
net_keyboard.connetfailed=connect failed
net_keyboard.connetsucceeded=connect succesful
net_keyboard.outputlist=List
titles.devicemodify=Modify Device
comstring.failed=Failed
comstring.succeeded=Succeed
logfailed.invaild_pwd=password Invalid
logfailed.user_not_exist=User isnot exist
logfailed.login_time_out=Login Timeout
logfailed.user_has_logined=User has Logined
logfailed.user_locked=user is Locked
logfailed.user_is_black=BlackName
logfailed.busy=Busy
logfailed.connect_failed=connected failed
logfailed.failed=Login failed

titles.inputsetupinfo=Input Setting
inputsetup.searchinfo=Search Infomation
inputsetup.channelnum=Channels
inputsetup.channelstr=ChannelID
inputsetup.channelname=ChannelName
inputsetup.device=Device
inputsetup.brcmode=Mode
inputsetup.brcmodechoice=Main Stream|Extstream
inputsetup.mainstream=Main Stream
inputsetup.extstream=Extstream
inputsetup.errmessage=ChannelID must be unique,please input other
advc.decodetype=Decode Policy
titles.decodeconfig=Decode Setting

conf_hard.keysound=sound
conf_hard.keybackground=Background
conf_hard.keylock=Key is Locked
conf_hard.screenoff=Screen OFF
conf_hard.screenlight=Screen Light
titles.hardwarecfg=HardWare Config
advc.auxkey=auxkey
advc.auxfunction=Aux Functions
advc.auxfunctionsel=Snap|Talk
titles.auxconfig=Aux Config
ugm_main.addoperator=add Operator
ugm_main.modoperator=Modify Operator
ugm_add.device_num=DeviceID
ugm_main.adddevice=Add Device
ugm_add.channel_num=ChannelID
ugm_main.deloperator=Delete Operator
ugm_msg.no_account_to_delete=No Operate
ugm_main.channelList=Channels List
ugm_main.inputchannel=Input
ugm_main.outputchannel=Output
titles.remote_handle=Remote operate
comstring.commanual=Manual
comstring.comauto=Auto
conf_snmp.V1=V1
conf_snmp.V2=V2
conf_3g.num1=3G Network1
conf_3g.num2=3G Network1 2
conf_3g.num3=3G Network1 3
conf_3g.num4=3G Network1 4
conf_3g.netnumber=3G Network1
conf_3g.logout=Logout
conf_3g.dialup=Dialup
conf_3g.discon=Disconnect
conf_net.3gstate=3G State
conf_net.RSSI=RSSI
net_SNMP_set=SNMP
conf_snmp.enable=SNMP Enable
conf_snmp.version=SNMP Version
conf_snmp.port=SNMP Port
conf_snmp.readcommunity=Read-Community
conf_snmp.writecommunity=Write-Community
conf_snmp.trapIp=Trap Address
conf_snmp.trapPort=Trap Port
comstring.comapply=Apply

conf_img.channel1_12=CAM1-CAM12
conf_img.channel13_24=CAM13-CAM24
file_source_disk=From ReadWrite Hdd|From IO Device
No_USB_Device=No USB
no_record_for_fiveminute=No matching record
pg_cfgwifi_getiping=Searching IP....
bkup_data.backuprunning=Backuping, Can not operate
bkup_data.usbplayrunning=Playing ,Can not operate
bkup_data.realtimebkrunning=Realtime backuping, Can not operate
bkup_data.realtimebkstarted=Realtime backup
pg_cfgwifi_IPOrGatewayInvalid=IP Or Gateway is Invalid
tilte.navigation=Navigation
comstring.inpreviewplay=previewplay is not support

conf_net.WifiServer=WIFI Dongle
conf_net.SSID=SSID
conf_net.HideSSID=HideSSID
conf_net.Country=Country
conf_net.AutoChannel=Auto Channel
conf_net.AuthMode=AuthMode
conf_net.Key=WPAPSK(key)

conf_net.dfgatewayset=Default GateWay Setting
conf_net.ethinfo = Ethernet Info
conf_net.ethpriconflict = Ethernets conflicted
conf_net.cannotdelthisitem = this Items Cannt be Deleted

transaction_serial=serialID
starttime=Time
operator=Operator
linenumber=Line
GoodsNo=Commodity
GoodsItemNo=Bar code
GoodsPrice=Price
GoodsCount=Count
GoodsAmount=Amount
serialNum=serialNum
CardType=CardType
Total=Total
Payment=Payment
ReturnMoneny=ReturnMoneny
MemberCardmum=MemberCardmum
transactiontype=transactiontype
superPos.transtype_retail=retail
superPos.transtype_blankout=blankout
superPos.transtype_cancle=Break off
superPos.transtype_blankcancle=Break off
 
advc_hdd.RAID5Dset=RAID5 Setting
advc_hdd.ChanRIDA5set=Channel RAID5 Setting
advc_hdd.RAID5=RAID5
advc_hdd.virchRIAD5=Virch  RAID5
comstring.less3=must be less 3!
titles.light=Light Control
conf_alm.whistle=whistle
conf_alm.recTimeOut=Record Timeout
conf_3gnet.NOSERVICE=NOSERVICE
conf_3gnet.AMPS=AMPS
conf_3gnet.CDMA1x=CDMA1x
conf_3gnet.EDGE=EDGE
conf_3gnet.EVDO=EVDO
conf_3gnet.WCDMA=WCDMA
conf_3gnet.GPRS=GPRS
conf_3gnet.AUTO=AUTO
conf_3gnet.TD-SCDMA=TD-SCDMA
conf_3gnet.DOWN=DOWN
conf_3gnet.CONNECTING=CONNECTING...
conf_3gnet.UP=UP
conf_3gnet.CLOSE=CLOSING...
conf_3gnet.UNKNOW=UNKNOW
conf_3gnet.UNEXIST=UNEXIST
conf_3gnet.EXIST=EXIST
cfg3g_APN_NO_NULL=The APN and Dial Number can't be empty
conf_net.defaultgate=Gateway
conf_3g.dialup=Dial
conf_3g.disdialup=Disconnect
conf_3g.modulestate=Module State
conf_3g.SIMstate=SIM State
conf_3g.pppstate=PPP State
conf_3g.auth=AUTH
PortIsSystemPort=Can not Set System Port
conf_gen.replaybytime=Realtime Play
sch_filelock.nummax=Locked Files is exceeded the max num or capability
Log_Encode<EncType>=Audio Format
pppoe_no_allowed=PPPOE Cannot Allow this Operator
sch_filelock.onlylockmainstream=Can only Lock Main Stream
sch_filelock.filenotexisted=file is not existed
sch_filelock.fileiswriting=writing file cannot Lock
sch_filelock.islocked=file is Locked

conf_net.ftprecord=Record
conf_net.ftpsnapshot=Snap
pg_cfg3g_connectfailed=Dial-Up Failed
pg_cfg3g_disconnectfailed=DisConnect Failed
************************************** 2012.1.12 陈贤斌增加QSEE网路向导字符串 ********************
netWizard.setuptip=The next step will be a Network Setup so you can view the cameras over the internet.
netWizard.connectDVR=Please connect the Network cable from DVR to the Router.
netWizard.chknetcnnt=Checking Network Connection......Done
netWizard.gettingIP=Getting IP address......Done
netWizard.DVRIP=DVR IP address is
netWizard.DVRtoPC=To connect to DVR from a PC on the same network, type this address in the Internet Explorer:
netWizard.netstate=Checking Network Connection......
netWizard.nettip=Please check the network cable make sure if connected to the Router or try another cable. Restart DVR.If still Error,look for the instruction on the CD
netWizard.upnpstate=Checking Router for UPNP Function........
netWizard.upnpok=Note:UPNP=Universal Plug and Play. This will make The Router and DVR discover each other's presence in the Network and establish a functional relationship for data sharing and communication.
netWizard.upnperror=Note:Router does not support UPNP or the UPNP option is not enabled in the Router. Please check your Router manual. To do Port forwarding manually, please read the instruction in the CD.
netWizard.portstate=Opening port 85 and 37777........
netWizard.checkWANIP=Checking WAN IP address.........
netWizard.wanstate=Checking Internet IP address.........EEEOR
netWizard.wanaddress=Internet IP address is:
netWizard.internet=To connect and view cameras from internet or outside the Network:
netWizard.inputaddress=input this address in the Internet Explorer:
netWizard.httpaddress=http:// 
wizard.infotip=Date/Time and Network Setting
advc_dflt.titlename=CHANNEL NAME
locked.channelstr=CH

conf_net.portmap=Port Forwarding
conf_out.spotsource=Output Type
conf_out.spotsourceenum=TV|HDMI

appEventAlarmDecoder=AlarmDecoder
conf_com.common=Com Common

*******************D1增强型增加raid相关字符串************************
conf_net.ethIpConflict=IP of eth0 and eth1 Conflict, Please reset!

titles.raid=Raid Management 		
advc_main.raidtip=Manage HDD and Raid group, set Raid mode and manage hotspare disk and etc. 

raid.titles.addRaid=Add Raid
raid.titles.modRaid=Modify Raid
raid.titles.detailRaid=Raid Details
raid.titles.deleteRaid=Delete Raid
raid.titles.hotDisk=Hotspare Disk Management

raid.oper.add=Add
raid.oper.mod=Modify
raid.oper.del=Delete
raid.oper.format=Initialization
raid.oper.hotdisk=HotspareManagement
pgquick.record=Record
sch_filelock.lockerror=Locked Error


raid.info.name=Raid Name
raid.info.type=Type
raid.info.state=Status
raid.info.members=Member Disk
raid.info.capcity=Capacity Info
raid.info.diskname=Sub-disk
raid.info.manu=Manufacturer Info



raid.tips.operFailed=The operation failed.
raid.tips.operSucced=The operation succeeded.
raid.tips.confirmDelete=Do you really want to delete now?
raid.tips.confirmSetHotdisk=Do you really want to set hotspare disk now?


raid.hotdisk.addto=Add to 

raid.tips.needSelectDisk=Please select a disk first. 
raid.tips.needStopRecord=System needs to stop record if you want to set Raid. System will automatically enable schedule record after you completed the setup. Do you really want to continue now?


raid.titles.addspare=Add Hotspare
raid.titles.deletespare=Delete Hotspare
raid.tips.makeSureToDel=System needs to reboot after you deleted the Raid. Do you really want to continue now?


raid.tips.NotEnoughPd=Current disk amount is not enough to constitute a Raid
raid.tips.NotSupportSpare=It does not support to add hotspare disk
raid.tips.NotEnoughSpace=The capacity of the hotspare is not enough


raid.tips.delSuccedAndToReboot=Successfully deleted the Raid. System is going to reboot.
raid.tips.NotEnoughPdRaid0=You need at least two disks to set Raid0!
raid.tips.NotEnoughPdRaid1=You need two disks to set Raid1!
raid.tips.NotEnoughPdRaid5=You need three disks to set Raid5!
raid.tips.NotEnoughPdRaid10=You need at least four disks or more even disks to set Radi10!

raid.info.synch=Sync process

conf_img.preview=Preview
tilte.frontboardalarm=Front panel alarm
comstring.comdelraiddata=Deleting Raid information now, please wait...

info_log.raiderror=Raid status
appEventAlarmRaid=Raid Alarm
disk.Number=Sub-disk SN
Specific_spare=Local
Global_spare=Global

advc_main.lighttip=Light Controller Setup
spare.info=Global|Local
pg_cfgwifi_IPOrGatewayInvalid=Please input Valid IP informations
************************************** 2012.3.9 增加康乐自动断线功能所需字符串 ********************
ugm_authority.AutoDisconnect=AutoDisconnect


advc_camera_ipcheck=Config have same IP and RemoteChannelNo

conf_dst.tiptime=start time must ealier than end time